- RS Stock No.:
- 146-5267
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- ASNU 25
- ผู้ผลิต / Manufacturer:
- Stieber
สินค้าหมดชั่วคราว (Temporarily out of stock) - จะเป็นแบ๊คออเดอร์จัดส่ง (back order for despatch) 22/07/2024, จัดส่งภายใน (delivery within) 4-6 วันทำการ (working days)
เพิ่ม / Added
ราคา / Price Each
THB13,348.06
(exc. VAT)
THB14,282.42
(inc. VAT)
Units | Per unit |
1 - 4 | THB13,348.06 |
5 + | THB12,814.02 |
- RS Stock No.:
- 146-5267
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- ASNU 25
- ผู้ผลิต / Manufacturer:
- Stieber
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
รายละเอียดสินค้า / Product Details
Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.
คุณสมบัติ / Specifications
คุณสมบัติ | Value |
---|---|
Inside Diameter | 25mm |
Outside Diameter | 62mm |
Torque | 125Nm |
Race Width | 24mm |
Series | 63 |
Over-running Speed | 1700 (Inner) rpm, 2600 (Outer) rpm |
Keyway | Inner and Outer Race |
Drag Torque | 5.6Ncm |