Steca Solsum 6.6F 6A solar charge controller

  • RS Stock No. 860-2869
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. Solsum 6.6F
  • ผู้ผลิต / Manufacturer Steca
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): BG
รายละเอียดสินค้า / Product Details

Steca Solsum F

The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers.
The circuit board is completely electronically protected and with the LED user interface it is easy to check the battery state of charge at any time. Large terminals guarantee a simple connection of solar panels, battery and load. The Steca Solsum F works on PWM as a low loss series controller

Voltage regulation
Automatic detection of voltage
PWM control
Multistage charging technology
Current compensated load disconnection
Automatic load reconnection
Temperature compensation
Common positive grounding or negative grounding on one terminal
Monthly maintenance charge

Displays

Multifunction LED display
Multi-coloured LED
4 LEDs show operating states ∼ for operation, state of charge, fault messages

Electronic protection functions

Overcharge protection
Deep discharge protection
Reverse polarity protection of module (≤36 V),load and battery
Automatic electronic fuse
Short circuit protection of load and module
Overvoltage protection at module input
Open circuit protection without battery
Reverse current protection at night
Overtemperature and overload protection
Load disconnection on battery overvoltage

Solar Panels and Chargers

Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries.
Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity.

How Much power?

The daily power production of a solar panel can be calculated by multiplying the panel’s peak power rating by between 0.5 and 6 depending on the time of year, angle and location. For example; an 80Watt solar panel produces a peak current of 4.55A.

Solar Installation

Solar panels are usually installed at a 55-65° angle for optimal wintertime performance. For a year round power supply solar panels can be combined with Wind chargers.
Solar panels can be connected in parallel to increase power and in series to increase voltage.
To complete the system deep cycle batteries, a voltage regulator and electrical cables are required to get up and running. A range of convenient mounting kits are available for pole or wall mounting.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Solar Panel Voltage 12 V, 24 V
Maximum Power Rating for 12 V Panels 240W
Maximum Current Rating for 12 V Panels 6A
Maximum Power Rating for 24 V Panels 240W
Maximum Current Rating for 24 V Panels 6A
Dimensions 145 x 100 x 30mm
Depth 30mm
Length 145mm
Width 100mm
ผลิตภัณฑ์ที่เลิกผลิตแล้ว
Related Products
The Vinculo is a dual channel USB Host/Device ...
Description:
The Vinculo is a dual channel USB Host/Device Controller is targeted at rapid development and prototyping of USB Host/Device interfaces. An optional Vinculo prototyping board provides add-on expansion board support. The Vinculo features an 8-channel, 10Bit ADC, PWM interface and ...
DIN rail battery controllers with integrated battery test ...
Description:
DIN rail battery controllers with integrated battery test function designed for DIN rail UPS systems. Battery controller for Din rail UPS systemsInput 22…27.5VDC (RS 789-4073) and Input Input 11…14VDC (RS 789-4079)Built in battery test functionRelay alarm outputs, DC bus OK, ...
SITOP 24 V power supplies can be expanded ...
Description:
SITOP 24 V power supplies can be expanded with an uninterrupted power supply (DC UPS) with battery modules for bridging power failures in the order of hours. They prevent expensive downtimes and undefined plant states. In addition, the innovative SITOP ...
The MCP19111 is a Digitally Enhanced Power Analogue ...
Description:
The MCP19111 is a Digitally Enhanced Power Analogue Controller with Integrated Synchronous Driver. It combines a pure-analogue PWM controller with a supervisory microcontroller making it a fast, cost-effective, and configurable power conversion solution. The MCP19111 is ideal for standard power ...