- RS Stock No.:
- 134-6435
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- 410-299
- ผู้ผลิต / Manufacturer:
- Digilent
5 มีของพร้อมจัดส่งจากคลังสินค้าทั่วโลก (Global stock) ภายใน (Within) 4-6 วันทำการ (working days)
83 มีของพร้อมจัดส่งจากคลังสินค้าทั่วโลก (Global stock) ภายใน (Within) 4-6 วันทำการ (working days)
ราคา / Price Each
THB2,139.34
(exc. VAT)
THB2,289.09
(inc. VAT)
Units | Per unit |
1 - 4 | THB2,139.34 |
5 + | THB2,096.55 |
- RS Stock No.:
- 134-6435
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- 410-299
- ผู้ผลิต / Manufacturer:
- Digilent
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
JTAG-HS3 FPGA Programming Cable
The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC.
Features
Separate Vref drives JTAG signal voltages
Vref can be any voltage between +1.8V and +5V
USB 2.0 HS port drives JTAG bus at up to 30Mbit/sec
Compatible with Xilinx ISE 14.1 and newer
Compatible with Xilinx Vivado 2013.3 and newer
PC connector: MicroUSB
JTAG connector: 2 x 7-pin 2mm
Open-drain buffer on pin 14 allows processor reset of Xilinx Zynq platform
Vref can be any voltage between +1.8V and +5V
USB 2.0 HS port drives JTAG bus at up to 30Mbit/sec
Compatible with Xilinx ISE 14.1 and newer
Compatible with Xilinx Vivado 2013.3 and newer
PC connector: MicroUSB
JTAG connector: 2 x 7-pin 2mm
Open-drain buffer on pin 14 allows processor reset of Xilinx Zynq platform
Supported Target Devices
Xilinx FPGAs
Xilinx Zynq-7000
Xilinx CoolRunner™/CoolRunner-II CPLDs
Xilinx Platform Flash ISP configuration PROMs
Selected third-party SPI PROMs
Selected third-party BPI PROMs
Target Devices Not Supported
Xilinx 9500/9500XL CPLDs
Xilinx 1700 and 18V00 ISP configuration PROMs
Xilinx FPGA eFUSE programming
Note
This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
Supplied with
USB cable
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
คุณสมบัติ / Specifications
คุณสมบัติ | Value |
---|---|
For Use With | JTAG-HS3, Xilinx Tool |