Schneider Electric 24 V dc Safety Relay With 2 Safety Contacts and 4 Auxilary Contact

  • RS Stock No. 477-8684
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. XPSCM1144
  • ผู้ผลิต / Manufacturer Schneider Electric
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
COO (Country of Origin): DE
รายละเอียดสินค้า / Product Details

XU2 S, Type 2, Single Beam System

The XPS-CM safety module, used in conjunction with the single beam XU2S safety light devices, constitutes a type 2 safety light curtain conforming to IEC 61496-1.

Flexibility allows connection of up to 4 light beam devices which can protect a zone up to 1200mm high and 8m wide (EN999)
Automatic self-checking every 5ms
Built in muting function allows the light device to be inhibited by an external sensor
Single beam sensors (for muting function) available separately
Ideal for transfer line applications
Solid state auxiliary output (from module) PNP 20mA/24Vdc
2 N/O safety outputs

Note

This product is supplied with a full installation instruction manual which should be strictly adhered to. Particular attention should be given to section 3.5 (installation positioning and electrical inter-phasing).

Single Beam Safety Device

คุณสมบัติ / Specifications
คุณสมบัติ Value
Supply Voltage 24 V dc
Auxiliary Contacts 4
Function Light Beam/Curtain
Safety Contacts 2
Range Preventa
Terminal Type Screw
2 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 4-6 วันทำการ (working days)
ราคา / Price Each
THB 10,586.70
(exc. VAT)
THB 11,327.77
(inc. VAT)
Units
Per unit
1 - 5
THB10,586.70
6 +
THB10,366.45
Related Products
Relay module with driven contacts, Nominal input voltage: ...
Description:
Relay module with driven contacts, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Red status indicator, Module width: 15 mm. Reinforced insulation between coil and contactsA separator plate (e.g., 209-191) must be used for voltages ...
Relay module, Nominal input voltage: 24 VDC, 2 ...
Description:
Relay module, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Green status indicator, Module width: 15 mm. Reinforced insulation between coil and contactsA separator plate (e.g., 209-191) must be used for voltages greater than 250 ...
Monitors the two-hand operation of metal working presses ...
Description:
Monitors the two-hand operation of metal working presses and other processing machines with dangerous lock movementsConforms to amended standard EN574 and therefore safety level III-C for wiring in line with the installation instructions supplied with the device (as at: 02-1997)Safety ...
Provides 2N/O safety outputs plus 2 semi conductor ...
Description:
Provides 2N/O safety outputs plus 2 semi conductor outputs for signalling to a PLCTo initiate cycle both pushbuttons must be operated within 0.5 secondsMonitors change of state of both pushbuttons2 channel monitoring and feedback loop3 LED indication on front face. ...