Miller By Honeywell Front, Rear Attachment Stretchable Safety Harness

  • RS Stock No. 104-0879
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. T. 3 : 1032841
  • ผู้ผลิต / Manufacturer Miller By Honeywell
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
COO (Country of Origin): FR
รายละเอียดสินค้า / Product Details

Miller H Design 2 point Harness

The Miller H Design 2-point harness complete with mating buckles on the chest and leg straps plus 2 sternal webbing loops. This new generation harness provides you with comfort and freedom of movement providing security to workers. This harness is excellent for use within the construction and general industries. Horizontal leg straps prevent uncomfortable friction and the H architecture of the harness gives total freedom for legs and arms. There are many benefits to this harness including adjustable buckles, accessible anchor points, bended position back D-ring. Adjustable chest and leg straps ensure a remarkable versatile harness.

FEATURES and BENEFITS:

2 point harness
H architecture
Adjustable buckles
Adjustable leg and chest straps
Accessible anchor points
Bended position back D-ring
East front strap clip
Fall indicators
Horizontal leg straps
Long front loops
Mating buckles on chest and leg straps
Sternal webbing loops
Comfortable
Easy movement

STRAP / SECURITY:

Shoulder straps – water repellent, anti-stain - Breaking strength 2700 daN
Other straps – water repellent, anti-stain – Breaking strength 2700 daN
Black anchorage D-ring – steel – Breaking strength 2300 daN
Sternal anchorage point – long webbing loops
Steel mating buckles – Breaking point 900 daN

SAFETY:

Fluo green textile
High visible stitching
Front and back fall indicators on back plate
Labels for traceability
Water repellent and stain free webbing

APPLICATIONS:

Building and construction
General Industry
Telecoms
Utilities

Standards

EN 361

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

คุณสมบัติ / Specifications
คุณสมบัติ Value
Harness Attachment Point Front, Rear
Harness Size L/XL
Belt Included No Belt
Adjustable Straps Chest, Leg, Shoulder
Buckle Type Pass Through
Hi-Vis No
Reflective No
Padding None
Harness Colour Black, Green
Weight Capacity 140kg
Fastener Material Steel
15 ภายใน (Within) 5 - 8 วันทำการ (สต๊อกทั่วโลก) (working days (Global stock))
23 ภายใน (Within) 5 - 8 วันทำการ (สต๊อกทั่วโลก) (working days (Global stock))
ราคา / Price Each
THB 2,091.16
(exc. VAT)
THB 2,237.54
(inc. VAT)
Units
Per unit
1 +
THB2,091.16
Related Products
PSS Screw CS20 / ML00 17 mm Karabiner ...
Description:
PSS Screw CS20 / ML00 17 mm Karabiner is made from steel with a breaking strength of 2500 daN. FEATURES and BENEFITS:SteelOpening 17 mmWeight 0.165 kgDimensions 104 x 58 mmBreaking strength 2500 daNTemperature range -30°C to +50°C.
SERVICES - ready for use fall arrest kit: ...
Description:
SERVICES - ready for use fall arrest kit: Harness with extensible "Riplight System II®" patented waves with positioning belt. 2 fall arrester anchorage points (back - front). 4 adjustable buckles. Positioning belt with thermoformed back closed with wide Velcro. 120° ...
2-point full body harnessWith one dorsal attachment D-ring ...
Description:
2-point full body harnessWith one dorsal attachment D-ring and front textile loops for fall arrestChest, shoulder and leg straps adjustableFor all sizes up to a weight of 136 Kg Parachute BuckleSit StrapPolyester webbing 44 mmBreaking strength 23 kNWeight 1155 g. ...
The Protecta™ Pro Stretch™ shock absorbing lanyard is ...
Description:
The Protecta™ Pro Stretch™ shock absorbing lanyard is designed for users working at height or around edges to absorb the kinetic energy that’s created if you fall. This removes the need for an integrated shock pack, resulting in a well-balanced ...