ON Semiconductor STK672-440BNGEVB Motor Driver for STK672-440BN-E

  • RS Stock No. 117-6747
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. STK672-440BNGEVB
  • ผู้ผลิต / Manufacturer ON Semiconductor
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): JP
รายละเอียดสินค้า / Product Details

STK672-440BNGEVB – 2-Phase Microstep Motor Driver Evaluation Board, ON Semiconductor

The ON Semiconductor STK672-440BNGEVB Evaluation Board features the STK672-440A-E (RS 774-0862) 2-phase stepper motor driver with PWM current control.

Its 4-phase distribution stepping motor controller supports five excitation methods: 2 phase, 1-2 phase, W1-2 phase, 2W1-2 phase, and 4W1-2 phase excitations. It can also provide control of the basic stepping angle of the stepping motor divided into 1/16 step units. The motor speed can also be controlled with only a clock signal.

Overcurrent and over-heat protection
Current detection resistors

Motor Driver Evaluation Kits, ON Semiconductor

คุณสมบัติ / Specifications
คุณสมบัติ Value
Power Management Function Motor Driver
Kit Classification Evaluation Board
Featured Device STK672-440BN-E
ผลิตภัณฑ์ที่เลิกผลิตแล้ว
Related Products
Supports up to 20V Output Pull-up Voltage–40°C to ...
Description:
Supports up to 20V Output Pull-up Voltage–40°C to 125°C Operating Temperature RangeSupports Wide Range of Stepper Motors, DC Motors, Relays, and Inductive CoilsLow Output VOL of 0.4V (Typical) With– 140mA Current Sink per Channel at 5.0V Logic Input(1)– 1A Current ...
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver ...
Description:
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver expansion board based on the STSPIN220 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • ...
Evaluation board for the NCP161 linear regulator capable ...
Description:
Evaluation board for the NCP161 linear regulator capable of supplying 450 mA output current. Designed to meet the requirements of RF and analogue circuits, the NCP161 device provides low noise, high PSRR, low quiescent current, and very good load/line transients. ...
The NCP101X series integrates a fixed-frequency current-mode controller ...
Description:
The NCP101X series integrates a fixed-frequency current-mode controller and a 700 V voltage MOSFET. Housed in a PDIP7 package, the NCP101X offers everything needed to build a rugged and low-cost power supply, including soft-start, frequency jittering, short-circuit protection, skip-cycle, a ...