LPZ-LD air nozzle

  • RS Stock No. 202-3155
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. LPZ-LD
  • ผู้ผลิต / Manufacturer Festo
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
รายละเอียดสินค้า / Product Details

The Festo air nozzle LPZ-LD with noise reduction. This is powerful and focused air jet and It has low noise level.

Ambient temperature -10 - 50 °C
Pneumatic connection Male thread M12x1.25
Materials note Conforms to RoHS
Material housing (* Aluminium, * Zinc die-casting, * Chromed-plated)

คุณสมบัติ / Specifications
คุณสมบัติ Value
Material Aluminium
ขออภัย เราไม่สามารถตรวจสอบสต็อคสินค้าได้ในเวลานี้ โปรดรีเฟรชเพจอีกครั้ง
ราคา / Price Each
THB 844.20
(exc. VAT)
THB 903.29
(inc. VAT)
Units
Per unit
1 +
THB844.20
Related Products
The SMC VMG series of blow guns have ...
Description:
The SMC VMG series of blow guns have a large effective area without nozzle. Pressure loss is 0.725psi (0.005MPa) or less when a nozzle bore size of 2.5mm is used. Energy saving Shock resistant bodyGun body made from high impact, ...
The Festo membrane air dryer MS4-LDM1-1/4-P10 has reduced ...
Description:
The Festo membrane air dryer MS4-LDM1-1/4-P10 has reduced pressure dew-point, with metal bowl. It has direction of flow: from left to right. Size 4Series MSAssembly position Vertical +/- 5°Design structure Membrane dryerOperating pressure 3 - 12,5 bar.
The Festo membrane air dryer MS6-LDM1-1/2-P20 has reduced ...
Description:
The Festo membrane air dryer MS6-LDM1-1/2-P20 has reduced pressure dew-point, with metal bowl. It has direction of flow: from left to right. Size 6Series MSAssembly position Vertical +/- 5°Design structure Membrane dryerOperating pressure 3 - 12,5 bar.
The Festo D series membrane air dryer has ...
Description:
The Festo D series membrane air dryer has a 1/2 in pneumatic thread connection with internal air consumption. The operating pressure is ranges between 3bar and 12.5 bar. It is suitable for dry and clean compressed air. Size= maxiAssembly position ...