Mitsubishi PLC Expansion Module Power Supply 8 → 64 Input, 8 → 64 Output 100 → 240 V ac, 24 V dc

  • RS Stock No. 611-9554
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. FX2N-8EYR-ES/UL
  • ผู้ผลิต / Manufacturer Mitsubishi
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
COO (Country of Origin): JP
รายละเอียดสินค้า / Product Details

Digital Expansion Blocks

These are available in 8 or 16 input or output point sizes. They attach directly to the right hand end of the Base Unit or Expansion Unit (see Digital Expansion Units below) which also provides them with power. Input blocks are opto-isolated, 24Vdc sink or source selectable to suit NPN or PNP sensors, and output blocks are available with relay or transistor outputs. The number of blocks that may be added depends on a number of factors. However, as a guide, with the FX1N, blocks up to 32 I/O can be added. Further expansion (of FX1N and FX2N) is achieved by adding an Expansion Unit (see 2 below), which in turn can be further expanded by adding more Expansion Blocks. With the FX2N, the number of I/O that can be added depends on the size of the Base Unit. For 16 and 32 I/O FX2N base units and 32 I/O Expansion units, up to 32 inputs, or 24 outputs, or (for example) 24 inputs and 8 outputs can be added. For larger Base and Expansion Units, up to 64 inputs, or 48 outputs, or (for example) 32 inputs and 24 outputs can be added. For full configuration details and limitations, please refer to the FX1N and FX2N Hardware Manuals.

Mitsubishi Expansion Module

The Mitsubishi expansion module is designed to be used with the FX3U series. It is available in 8 input and output point sizes. This module can be attached directly to the right-hand end of the base unit or expansion unit, which also provides it with power. Input blocks are opto-isolated or source selectable to suit NPN or PNP sensors and output blocks are available with a relay or transistor outputs.

Features and Benefits

• Available communication protocols are RS-232, RS-422, RS-485, USB
• DIN rail mounting type
• Operating voltage ranges between 100VAC and 240VAC
• These outputs do not require a separate power supply as they are supplied via the basic device bus
• Relay/Transistor output

Applications


Industrial automation
• Robotics
• Automobiles industry

Certifications


UL approved
• cUL approved
•CE

Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC's

Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.

All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.

คุณสมบัติ / Specifications
คุณสมบัติ Value
For Use With FX3U Series
Module Type Power Supply
Output Type Digital, Relay, Transistor
Number of Inputs 8 → 64
Number of Outputs 8 → 64
Voltage Category 24 V dc, 100 → 240 V ac
Memory Available Yes
Length 90mm
Width 350mm
Depth 87mm
Dimensions 90 x 350 x 87 mm
10 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 5,562.25
(exc. VAT)
THB 5,951.61
(inc. VAT)
Units
Per unit
1 +
THB5,562.25
Related Products
The 2190E oscilloscope combines performance and value all ...
Description:
The 2190E oscilloscope combines performance and value all in one portable solution. With advanced triggering capabilities, long waveform memory up to 40,000 points, and extensive features such as pass/fail limit testing, digital filtering, waveform recorder, and 32 automatic measurements, this ...
A fixed, high-power power supply for use in ...
Description:
A fixed, high-power power supply for use in a wide variety of applications in various fields.Power: N+1 cumulative power supplies, thanks to active parallel capabilityProtection against short-circuits, controlled ventilation.Adjustable output voltage 10 →15 V, 25 A from 10 → 12 ...
For applications sensitive to power interruptions, the battery ...
Description:
For applications sensitive to power interruptions, the battery control modules are used to supply voltage after the network has been cut off, allowing for a back-up of the current values or the protection of certain actuators supplied with 24 Vdc.Retaining ...
The first user configurable power supply allowing system ...
Description:
The first user configurable power supply allowing system designers to rapidly integrate into a system. Boasting 90% efficiency in a 1U high package. The output modules must be inserted into the chassis for the required output voltages upto the total ...