Testec HVP Series TT-HVP15 HF Oscilloscope Probe, Passive Type, 50MHz, 1:1000, BNC Connector

1000:1 voltage divider type high voltage probe
BNC termination and earthing crocodile clip
Screw in tip and screw in hook supplied
Approved to EN61010-1 & EN61010-2-031

This product is for use with instruments with a permanent earth connection

TUV

The Testec high voltage divider passive oscilloscope probe is an accessory to be used with analogue or digital oscilloscope having an input resistance of 1Mohm and nominal input capacitance between 15pF and 30pF. The 1000:1 divider extends the voltage measurement capability 15KVDC or 10KVRMS.
Note:
This product is for use with instruments with a permanent earth connection.

• Bandwidth is DC to 50MHz (-3dB)
• Attenuation is 1:1000
• Rise time is 7ns
• Input impedance is 100Mohm ll1pF each side to ground
• Common mode voltage range is 10KV
• Non-destructive Max input voltage is 15KV or 10KVRMS
• Compensation ranges between 15pF and 30pF
• BNC termination and earthing crocodile clip
• Screw-in tip and screw-in hook supplied

• EN61010-1 approved
• EN61010-2-031 approved
• TUV approved
• CAT I