Non-Isolated DC-DC Converter, 24V dc Output, 1.3A

  • RS Stock No. 891-3399
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. SCD30S24-DN
  • ผู้ผลิต / Manufacturer SolaHD
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
รายละเอียดสินค้า / Product Details

SCD Series, Industrial DC to DC Converter

The SCD series encapsulated converters have been designed to power industrial control instrumentation devices and equipment in applications where the use of AC power is not possible. They have high reliability and tight regulation on even the most difficult of factory-floor conditions.Easy-to-install DIN Rail and chassis mounting makes these units extremely user friendly and helps to reduce instillation time and costs. The terminals have been designed to not only be easy to wire but also easy to access. Various options are available covering a wide range of voltages.

These units work by regulating the voltage making them ideal for sensitive equipment run from battery power. This can be important as a 24 Vdc battery can operate from as high as 30 Vdc at full charge and dip below 22 Vdc under heavy loads. These units will stabilise the voltage variation for equipment not designed to operate under those conditions.

They can also be used to convert commonly available dc voltages form industrial machinery and equipment, such as 24 Vdc, and convert them to other dc voltages that may be required by specific equipment being used within the same vicinity.

DIN Rail or Chassis mount by removing DIN clips
Rugged, encapsulated design to resist environment
IP20 protection
Wide 20 to 72 Vdc input range
M3 screw clamp terminations
Simple snap-on for DIN Rail TS35/7.5 or TS35/15
Galvanic isolation
Five year limited warranty

Sola HD Converters

คุณสมบัติ / Specifications
คุณสมบัติ Value
Input Voltage Range 20 → 72 V dc
Output Voltage 24V dc
Output Current 1.3A
Power Rating 30W
Mounting Type Chassis Mount, DIN Rail Mount
Number of Outputs 1
Length 120mm
Width 65mm
Depth 33mm
Minimum Temperature -25°C
Maximum Temperature +65°C
MTBF 800000h
Power Signal Conversion Type DC-DC
Load Regulation ≤0.5%
Holdup Time >10ms
Standards Met CE, CRUus, CULus
Series SCD
Special Features DIN Rail or Chassis Mount by Removing DIN Clips, Five Year Limited Warranty, Galvanic Isolation, IP20 Protection, Rugged Encapsulated Design to Resist Environment
Ripple And Noise ≤1 (Ripple) %, ≤2 (Noise) %
Regulator Type Switched Mode Power Supply
Line Regulation ≤0.5%
Weight 390g
Protection Features Over Current Protection
Application Harsh Environment, Industrial, Remote Site, Telecom
สินค้าหมดชั่วคราว, จะเป็นแบ๊คออเดอร์จัดส่งเมื่อในสต๊อกมีของพร้อมส่ง
ราคา / Price Each
THB 10,402.72
(exc. VAT)
THB 11,130.91
(inc. VAT)
Per unit
1 +
Related Products
LH15 series is a compact size power converter ...
LH15 series is a compact size power converter offered by RS Pro. It features universal input voltage, taking both DC and AC input voltage, low power consumption, high efficiency, high reliability, safer isolation. It offers good EMC performance, which meet ...
CBS Series isolated DC-DC converters from Cosel are ...
CBS Series isolated DC-DC converters from Cosel are a compact solution, constructed in the industry standard half brick size. Rated output voltage options are available from 50 W to 450 W. CBS DC-DC converters offer high efficiency and high density ...
High power density RPA60 series of converters with ...
High power density RPA60 series of converters with wide input voltage in an industry standard case. RPA30 converters are ideal for use in the railway and industrial applications. 93.3% efficiencyUL, EN50155 pendingEffective in areas with minimum board spaceHigh power densityWide ...
The JWE08 Series of DC-DC Converters from XP ...
The JWE08 Series of DC-DC Converters from XP Power are available in single or dual outputs with an ultra wide 4:1 input range. Available in DIP 6 Package, ITE Safety Approved and high-power density. • Regulated Single and Dual Output• ...