Martindale TEK 200 Magnetic Field Detector ±10mT, 100V ac to 600V ac

  • RS Stock No. 719-0876
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. RSTEK200
  • ผู้ผลิต / Manufacturer Martindale
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
COO (Country of Origin): PH
รายละเอียดสินค้า / Product Details

Martindale TEK200 Non-Contact Voltage and Magnetic Field Detector

A non-contact voltage detector with the additional ability to detect magnetic fields, the TEK200 has audible warning and a self-test feature. Sleek in design and designed to be durable the detector can operate in an altitude of up to 2000m.
Suitable for permanent magnets and for indication of the polarity of machine windings, it has a magnetic sensitivity of ±10 mT. Indicating the operation of solenoid valves in pneumatic and hydraulic control equipment, testing relays or solenoids in a wide range of controls it has a wide variety of applications.

Features and Benefits:

• Senses AC voltages from 100 - 600V
• Detects electrical field
• Eliminates need for separate proving unit
• Self-testing
• Displays polarity of magnetic fields
• Powered by PP3 battery (RS Stock No. 394-9059)

How do magnetic field sensors and detectors work?

Magnetic field sensors are able to detect changes such as direction, strength or flux in a magnetic field. Magnetic field detectors are able to detect fields, such as unipolar, bipolar and electro-magnetic. There are many types of technology used for this and they all have different approaches. Some record the resistance, some have coils surrounding magnetic material, another measures fields against an internal magnet based response that runs through a fluxing set of parameters. Some devices contain switches, when the state of the switch is changed for example from open to closed, a magnetic field has been detected. The most commonly known technologies are Fluxgate, Hall Effect, Magnetoresistive, magnetoinductive and SQUID. (Superconducting quantum interference devices)

คุณสมบัติ / Specifications
คุณสมบัติ Value
Indicator Type Magnetic Field, Voltage
Magnetic Sensitivity ±10mT
Battery Type 9V
Audible Tone Yes
Power Source Battery
Safety Category CAT III 1000 V, CAT IV 600 V
Dimensions 32 x 22 x 202mm
Weight 150g
Height 202mm
Length 32mm
Maximum Detection Voltage 600V ac
Maximum Operating Temperature +50°C
Safety Category Voltage 600 V, 1000 V
Width 22mm
Minimum Operating Temperature 0°C
Minimum Detection Voltage 100V ac
Model Number p TEK 200
Safety Category Level CAT III, CAT IV
70 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 2,987.07
(exc. VAT)
THB 3,196.16
(inc. VAT)
Units
Per unit
1 +
THB2,987.07
Related Products
RS Pro ICMA5 Slim line clamp meter used ...
Description:
RS Pro ICMA5 Slim line clamp meter used to check voltage, resistance, continuity and current. The integral non-contact ac voltage detector enables fast identification of the presence of mains voltages. The open jaw current clamp enables safe, non-intrusive measurement of ...
The FLIR high-quality voltage, continuity and current testers ...
Description:
The FLIR high-quality voltage, continuity and current testers have 100A/600V measuring range. This electrical tester is ideal for electricians who troubleshoot and verify electrical system. They feature an optimized, open-jaw design that can fit into tight spaces and reliably measure ...
For safe and reliable live indicationSuitable for non-contact ...
Description:
For safe and reliable live indicationSuitable for non-contact AC voltage tests, earthing/ground connection checks, proper connection checks, broken wire detectionHigh sensitivity tester offering an extensive non-contact voltage detection range of 70-1000V ACBright red LED illumination on detection of AC ...
Volt Stick is a pen style non-contact voltage ...
Description:
Volt Stick is a pen style non-contact voltage detector from our high quality RS PRO brand. Able to safely check the presence of an AC voltage within cables, wall sockets and fuses junction boxes, conveniently no current flow is needed ...