STR1 RFID Safety Switch, Vistal, 24 V dc

  • RS Stock No. 146-6207
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. STR1-SASU0AC8
  • ผู้ผลิต / Manufacturer Sick
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
รายละเอียดสินค้า / Product Details

the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with three codes. universally coded sensors accept all actuators. an actuator must be taught into both the uniquely coded and permanently coded variants, this is the only actuator that the Str1 then accepts. the sensor has three active sensor surfaces. the actuator comes in three different sizes. this allows the Str1 to offer maximum mounting flexibility.

response range of up to 14 mm
Small housing with flexible mounting
options
Sensor activation possible from three
sides
three different actuators available

คุณสมบัติ / Specifications
คุณสมบัติ Value
Supply Voltage 24 V dc
Housing Material Vistal
Auxiliary Contacts 1
Connection Type 8­Pin M12 Plug
Switch Type Safety
Terminal Type 0.2m cable with 8-Pole M12 Connector
Series STR1
Switching Distance 6 (Side Sensor - On) mm, 10 (Front Sensor - On) mm, 25 (Off) mm
IP Rating IP67
Supply Current 50 mA
Actuator Included Yes
Safety Category Category 4 (EN ISO 13849), PL e (EN ISO 13849), SIL3 (IEC 61508), SILCL3 (EN 62061)
Sensor Principle RFID
Built in Safety Relay Yes
Actuator Type Standard
Depth 40mm
Length 18mm
Width 26.2mm
Number of Approach Directions 5
Dimensions 18 x 26.2 x 40 mm
Standards Met CE, CULus, EN 62061, FCC, IEC 61508
1 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 4-6 วันทำการ (working days)
ราคา / Price Each
คือ THB6,383.58
THB 6,078.18
(exc. VAT)
THB 6,503.65
(inc. VAT)
Units
Per unit
1 +
THB6,078.18
Related Products
The F3S-TGR non contact safety switches are designed ...
Description:
The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a ...
Control category up to 3 to EN954-1Output function ...
Description:
Control category up to 3 to EN954-1Output function indicated at rear of switch by LEDIP67 protection Suitable for food industry if using BPS303 magnet Dimensions: L 44mm x W 45mm.
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
The Pilz PSENcode series non-contact safety switch has ...
Description:
The Pilz PSENcode series non-contact safety switch has an assured switching distance of 15mm. It has 2OSSD RFIDsafety outputs. It is coded and the only switch with an actuator from the PSEN cs3.1 series. Supplied with: ActuatorCaution: EN60947-5-3 standard is ...