Rose Ex Aluminium Series Grey Aluminium Junction Box, IP66, 10 Terminals, ATEX, 175 x 80 x 57mm

Rose Aluminium Ex junction boxes are a die-cast aluminium ALSi 12 enclosure to be used in all EXia and EXe safety application. Specially designed to provide explosion protection plus the range includes the standard and flange EX pre-assembled with terminal blocks and cable glands. This hard wearing EX enclosure is suitable for applications in various harsh environments. The aluminium Ex junction box enclosures are IP 66 rated with full certification and explosion protection standards.

Applications include petrol stations, chemical plants, and environments where spark generation could cause a potential hazard
Supplied with terminals fitted on a DIN rail, tapped holes machined in enclosure and 2 x M20 cable glands
Available in aluminium (stock nos. 229-0687 & 229-0766) and fibre-glass reinforced duroplastic polyester with graphite added (stock no. 229-0744)

Stock number 2290687, part number 15.08 18 06, type AExi 15035, 80 x 175 x 57 mm.
Stock number 2290766, part number 15.12 22 08, type AExi 15070, 120 x 220 x 81 mm.

• All Ex areas.
• Harsh environments.
• Various climate zones.

• II 2G Ex e IIC T6/T5/T4 Gb
• II 2G Ex ia IIC T6/T5/T4 Gb
• II 2G Ex d e ia [ia] mb IIC T6/T5/T4 Gb
• II 3G Ex e d mb ia [ia] nA nC [op is] IIC T6, T5, T4 Gc
• II 2D Ex tb IIIC T80°C/T95°C/T130°C Db IP66

• The first number is the protection from solids.
• The second number is the protection from liquids.
• IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures.

• Exi enclosure, top and base.
• 2 x M20 cable glands.
• Terminal blocks.

IP 66 EN 60529, EN 60079-0

PTB 00 ATEX 1063

II 2 G EEx e II T6 bzw.

Need a reliable way to protect your electrical connections in hazardous areas? Choose this junction box from ROSE. It has an ATEX certification for safe use in potentially explosive environments. The robust enclosure is made of die-cast aluminium, so it's resistant to corrosion and impact. Its IP66 rating means it's dust-tight and protected against high-pressure water jets, making it a good choice for use in outdoor environments. This junction box is supplied with stainless steel lid screws that are corrosion-resistant, so they'll keep the lid firmly in place to prevent unauthorised access and tampering.

• M20 cable glands provide a secure seal around the cable entry
• VMQ silicone seal for resistance to wear and oils
• Wide operating temperature range of -55°C to +90°C for use in harsh environments

• Vehicle paint spraying
• Flour mills
• Saw mills

This junction box has compact dimensions of 80 (height) x 175 (width) x 57mm (depth), so it won't take up too much space in your setup.

8888