FTDI Chip USB to Serial/Parallel Development Board for FT232H, UM232H

  • RS Stock No. 737-4695
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. UM232H
  • ผู้ผลิต / Manufacturer FTDI Chip
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

UM232H USB to Serial UART Development Module, FTDI Chip

The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signaling and protocols. The UM232H is ideal for development purposes to quickly prove functionality of adding USB to a target design. The UM232H is a module designed to plug into a standard 0.6in wide 28-pin DIP socket. The USB connection to a host system is via a mini-B USB connector.

USB 2.0 Hi-Speed (480Mbits/s) and Full Speed (12Mbits/s) compatible
Entire USB protocol handled on the chip – No USB-specific firmware programming required
Small USB Type B connector common on many commercial devices
USB bus or self-powered options
Asynchronous UART transfer data rate up to 12Mbaud
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
Fully assisted hardware or X-On / X-Off software handshaking
Auto-transmit buffer control for RS-485 applications
Supports a half duplex FT1248 interface with a bi-directional data bus (1, 2, 4 or 8 bits wide)
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
Support for USB suspend and resume
UHCI / OHCI / EHCI host controller compatible
FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
+2.97 to +5.25V single-supply operation

The FTDI UM232H is a single channel USB-to-serial/FIFO development module. It is based on the FT232H single channel USB UART/FICO device. The UM232H development module is the perfect tool for adding USB functionality to your project.

How does it connect?
The UM232H plugs straight into a 0.6inch wide, DIP-28 socket. It connects to the host via the on-board mini USB socket.

What is it used for?
The UM232H is ideal for integrating USB into an existing design. Example applications include; smart card readers, wireless modems, bar code readers and medical applications.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Interface Function USB to Serial/Parallel
Kit Classification Development Board
Featured Device FT232H
สินค้าหมดชั่วคราว (Temporarily out of stock) - จะเป็นแบ๊คออเดอร์จัดส่ง (back order for despatch) 21/02/2020, จัดส่งภายใน (delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 672.40
(exc. VAT)
THB 719.47
(inc. VAT)
Units
Per unit
1 +
THB672.40
Related Products
The Microchip MCP401x Evaluation Board provides a simple ...
Description:
The Microchip MCP401x Evaluation Board provides a simple method to examine the performance of the featured MCP40D18 I²C Compatible Digital Potentiometer. The board is designed to be used with the Microchip PICkit Serial Analyser (Microchip part DV164122) via a 6-pin ...
FTDI click is a mikroBUS add-on board for ...
Description:
FTDI click is a mikroBUS add-on board for USB 2.0 to UART or I²C bus or SPI bus two serial interface converters. The featured integrated circuit is FT2232H, a dual high-speed USB 2.0 to UART (Universal Asynchronous Receiver and Transmitter) ...
The Isolated RS232/RS485 Evaluation Kit is a demonstration ...
Description:
The Isolated RS232/RS485 Evaluation Kit is a demonstration and evaluation platform for creating Isolated RS232 and RS485 solutions. It can be used in conjunction with EFM32 and EFM8 MCU Stater Kits (STKs). It simplifies the process of creating an isolated ...
The UMFT240XA is a development module that converts ...
Description:
The UMFT240XA is a development module that converts USB to serial 8-Bit 245 FIFO data interfaceAsynchronous and Synchronous bit bang interface modes are availableSmall PCB assembly module designed to fit a standard 7.62mm (0.3”) wide 24-pin DIP socketOn board USB ...