TLE49462KHTSA1 Infineon,, Bipolar Hall Effect Sensor, 2.7 → 24 V, 3-Pin SC-59

  • RS Stock No. 919-8878
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. TLE49462KHTSA1
  • ผู้ผลิต / Manufacturer Infineon
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
รายละเอียดสินค้า / Product Details

Hall Effect Switches, Infineon

A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.

Hall Effect Sensors, Infineon

A range of integrated circuits from Infineon utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Magnetic Type Bipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point -3.5 mT
Maximum Magnetic Sensor Operating Point 3.5 mT
Minimum Operating Supply Voltage 2.7 V
Maximum Operating Supply Voltage 24 V
Length 3mm
Width 1.6mm
Height 1.1mm
Dimensions 3 x 1.6 x 1.1mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SC-59
Typical Magnetic Sensor Hysteresis 4 mT
6000 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each (On a Reel of 3000)
THB 12.236
(exc. VAT)
THB 13.093
(inc. VAT)
Units
Per unit
Per Reel*
3000 +
THB12.236
THB36,708.00
*ตัวบ่งบอกราคา / price indicative
Related Products
Bipolar Latch Hall IC detects polarity change for ...
Description:
Bipolar Latch Hall IC detects polarity change for S and N. The operation is more stable comparing to magnetic force detection (The duty on output pulse will be consistent). It is perfect fit as an interface to wheel key and ...
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a ...
Description:
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The voltage regulator enables operation from 3.8 V to 24 V. On-board protection circuitry provides a ±30 V absolute maximum ...
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable ...
Description:
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.A south polarity ...