Adafruit 802, 1.8in Colour LCD Display Arduino Shield

  • RS Stock No. 124-5444
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 802
  • ผู้ผลิต / Manufacturer ADAFRUIT INDUSTRIES
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

Adafruit 1.8" Colour Display Shield for Arduino

The Arduino 802 is a compact shield which provides a simple way to add both a small screen, micro-SD card slot and a joystick to your Arduino project. The Arduino 802 module is perfect for tinkering and prototyping your ideas.

What is an Arduino Shield?
Arduino shields are add-on boards which sit directly on top of an Arduino board, for example, the Arduino UNO. These Arduino-compatible expansion boards enable to add new functionality to your Arduino board.

The Display:
This Arduino shield features a 1.8" display with 128 x 160 colour pixels. It is a true TFT display offering 18-bit colour with 262144 shades. This means that the Arduino 802 display is colourful with a high refresh rate. This display comes with a white LED backlight.

How do I control it?
The 802 module features a 5-way navigation switch (left, right, up, down, select) connected to Analogue 5 and when using the micro-SD card you will use digital pins 4 and 12. There is also 3 buttons marked A, B and C.
The display uses 4 pins to communicate and has its own pixel-addressable frame buffer, so you can use it without using all the memory or pins.

What is the microSD for?
The Arduino 802 comes with a microSD slot which enables you to loads full-colour bitmaps. You will need a FAT16 or FAT32 formatted microSD card for this (not included).

Which Arduino boards are compatible?
This shield works best with the Arduino UNO and compatible boards. The shield has an ultra-low-dropout 3.3 V regulator and a 3/5 V level shifter so it is safe to use with both 3.3 V and 5 V Arduino boards.
The Arduino 802 shield comes assembled. However, you will need to solder the header onto the shield.

How big is it?
The Arduino 802 measures 68.5 x 53 x 11.8 mm / 2.7 x 2.1 x 0.5 mm. It weighs 22g / 8oz.

Looking for inspiration?
On the Adafruit.com website, there is an open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring tutorial. The code is written for Arduino but it can be ported to another microcontroller.

Note: Display current draw is mostly based on the backlight, with full backlight the current draw is ∼100mA, this does not include the SD Card. SD cards can draw 20-100mA based on read/write. Measure current draw in circuit to get precise numbers.

Adafruit 1.8 Colour Display Shield for Arduino"

This great little shield offers a simple way to add both a small screen, micro-SD card slot and a joystick to your Arduino project. The 1.8 display has 128 x 160 colour pixels and is a true TFT offering 18-bit colour (262144 shades).

The display uses 4 pins to communicate and has its own pixel-addressable frame buffer, so you can use it without using all the memory or pins. The shield has an ultra-low-dropout 3.3 V regulator and a 3/5 V level shifter so it is safe to use with both 3.3 V and 5 V Arduinos.

5-way navigation switch (left, right, up, down, select) connected to Analogue 5 and when using the micro-SD card you will use digital pins 4 and 12.

This shield works best with the Arduino UNO and compatible boards. On the Adafruit.com website, there is a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring tutorial. The code is written for Arduino but it can be ported to another microcontroller."

""- 1.8"" diagonal LCD TFT display - 128 x 160 pixel resolution, 18-bit colour (262144 colours)
- 4 wire SPI digital interface
- Built-in micro-SD slot (card not included)
- 3.3 V or 5 V compatible
- 3.3 V @ 150 mA LDO regulator
- 2 white LED backlight
- Supplied with headers but require soldering
- Display current draw primarily the backlight and with the backlight at full, the current draw is around 100 mA. This does not include the SD card which can draw between 20 mA and 100 mA based on read/write. - Measure current draw in circuit to get precise numbers.
- Board dimensions: 69 x 53.5 x 6.94 mm (2.71"" x 2.1"" x 0.27"")""

Adafruit Colour Graphic LCD Displays

คุณสมบัติ / Specifications
คุณสมบัติ Value
Diagonal Display Size 1.8in
Display Technology Colour LCD Display
Kit Classification Arduino Shield
7 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 1,434.00
(exc. VAT)
THB 1,534.38
(inc. VAT)
Units
Per unit
1 +
THB1,434.00
Related Products
The CleO graphics display panel allows easy development ...
Description:
The CleO graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform. Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip. 3.5in 320 ...
The CleO50 graphics display panel allows easy development ...
Description:
The CleO50 graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform. Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip. 5.0in 800 ...
A range of TFT-LCD display panels with integrated ...
Description:
A range of TFT-LCD display panels with integrated on-board processing and memory (128MB). Images and fonts can be stored on-board and vector graphics and animations can be drawn using simple code to vastly reduce data transfer, strain on CPU and ...
The CY15FRAMKIT-001 is an F-RAM (Ferroelectric RAM) development ...
Description:
The CY15FRAMKIT-001 is an F-RAM (Ferroelectric RAM) development kit for high-performance, high-reliability and energy efficient serial F-RAM devices.The CY15FRAMKIT-001 kit has been designed to operate with the Arduino UNO R3 board with stackable connectors. Compatible with CY8CKIT-042, CY8CKIT-042-BLE and ...