XY2-CE Cable Switch, Right Side, 50m, NO/NC

  • RS Stock No. 814-8100
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. XY2CE1A150H7
  • ผู้ผลิต / Manufacturer Telemecanique Sensors
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
COO (Country of Origin): MA
รายละเอียดสินค้า / Product Details

Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches

These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.

Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)

Note

The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.

Standards

EN/ISO 13850:2006

คุณสมบัติ / Specifications
คุณสมบัติ Value
Range Preventa
Series XY2-CE
Reset Button Yes
Normal State Configuration NO/NC
Mounting Orientation Right Side
Maximum Rope Span 50m
Maximum Current 10 A
Maximum AC Voltage 300V
Number of Cable Entries 3
Size of Cable Entries 0.5 in NPT
Depth 4.1in
E-Stop Button No
Length 5.6in
Dimensions 5.6 x 7.8 x 4.1 in
Width 7.8in
สินค้าหมดชั่วคราว (Temporarily out of stock) - จะเป็นแบ๊คออเดอร์จัดส่ง (back order for despatch) 15/10/2020, จัดส่งภายใน (delivery within) 4-6 วันทำการ (working days)
ราคา / Price Each
THB 13,185.55
(exc. VAT)
THB 14,108.54
(inc. VAT)
Units
Per unit
1 +
THB13,185.55
Related Products
The Telemecanique Sensors XY2-CH-series emergency stop rope pull ...
Description:
The Telemecanique Sensors XY2-CH-series emergency stop rope pull switch has a 1NO/2NC contact configuration. It has Zamak housing and has a straight mount orientation. The maximum AC and DC voltage is 240VAC and 250VDC respectively and the current rating of ...
The Telemecanique sensors XY2CE is 240VAC rated voltage ...
Description:
The Telemecanique sensors XY2CE is 240VAC rated voltage wire switch. It has E-stop rope pull switch on left side-2NC+2NO with yellow pilot light, 230V-boot. • Contact operation slow break• Cover material is stainless steel• Housing material is Zamak• Maximum rope ...
The Telemecanique Sensors XY2CJ series emergency stop rope ...
Description:
The Telemecanique Sensors XY2CJ series emergency stop rope pull switch has a 1NO/1NC contact configuration. It has Zamak housing and maximum AC/DC voltage is 240VAC and 250VDC and the current rating of the switch is 3A and 270mA for AC ...
The Schmersal ZQ700 series rope pull-wire emergency stop ...
Description:
The Schmersal ZQ700 series rope pull-wire emergency stop switch has a 1NO/1NC contact configuration. It has thermoplastic housing and a straight mount orientation. This switch has a rope span of 10m and an electrical current rating of 4A at a ...