Petzl ASAP Rope Lock Aluminium, Nylon, Stainless Steel

  • RS Stock No. 136-3753
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. B71ALU
  • ผู้ผลิต / Manufacturer Petzl
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
COO (Country of Origin): FR
รายละเอียดสินค้า / Product Details

Petzl ASAP® LOCK Mobile Locking Fall Arrester

Petzl ASAP® LOCK mobile fall arrestor complete with locking function and designed to manage manipulations during rope ascents. An integrated locking function allows you to immobilise the lock reducing the length of a fall. You can move freely along the rope with no manual assistance plus if there is a shock or sudden movement the all arrestor locks onto the rope. When passing intermediate anchors, the connection arm makes the system loss resistant. When used with an energy absorbing lanyard the ASAP LOCK allows you to work at a distance from the rope.

FEATURES and BENEFITS:

ASAP LOCK mobile fall arrestor Provides constant fall protection
Arrests fall, slides and uncontrolled descents
Works with vertical and angled rope
Locks to the rope even when grabbed during a fall
Integrated locking function
Can immobilise the arrestor reducing fall length
Prevents the rope being blown upwards in strong winds
Effective and easy to use
Moves up and down the rope with no manual assistance
Easy to install and remove at any point on the rope
Connection arm makes the system loss resistant when passing intermediate anchors
Use with an ASAP’SORBER energy absorbing lanyard enables working at a distance from the rope.

SPECIFICATIONS:

Made from Aluminium, Nylon and Stainless Steel Weight – 425 g

Standards

CE EN 353-2, CE EN 12841 type A, EAC

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

คุณสมบัติ / Specifications
คุณสมบัติ Value
Product Type Rope Clamp
Material Aluminium, Nylon, Stainless Steel
7 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 9,801.00
(exc. VAT)
THB 10,487.07
(inc. VAT)
Units
Per unit
1 +
THB9,801.00
Related Products
Power input: 24VdcVoltage tolerance: +/-15%Current draw: 60mA at ...
Description:
Power input: 24VdcVoltage tolerance: +/-15%Current draw: 60mA at 24Vdc (at temperature 20 °C)Holding force: Up to 100lbsDimensions: 85x85x35mm (Lock)Dimensions: 65x65x40mm (Armature plate)Over-ride switchBrushed stainless steel.
With an impressive holding force of up to ...
Description:
With an impressive holding force of up to 1200lbs, our high quality RS PRO range presents this stainless steel strong and durable magnetic lock. Able to remotely monitor a doors lock or un-lock status with quick operation. Application includes security ...
Easier handling:Sheave mounted on sealed ball bearings for ...
Description:
Easier handling:Sheave mounted on sealed ball bearings for excellent efficiencyGate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchorMay be used with a CAPTIV positioning bar to favor loading of the ...
EZ STOP Rope shock absorbing lanyard, single leg, ...
Description:
EZ STOP Rope shock absorbing lanyard, single leg, supplied in a smaller and lighter shock pack rated up to maximum of 130 kg. The Rope lanyard uses HI-10 energy absorbing technology and is five times stronger than steel. Identification labels ...