Protecta Rope Grab

  • RS Stock No. 123-6177
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. AC202/03
  • ผู้ผลิต / Manufacturer Protecta
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
COO (Country of Origin): SK
รายละเอียดสินค้า / Product Details

Cobra Rope Grab with Extension Strap

Cobra guided type fall arrestor is a rope grab complete with an extension strap. The rope grab device is used in both manual and automatic modes plus is suited to various applications. The rope grab is used with 14 mm three strand twisted rope. Automatic locking ensures that the system is safe and the articulated CAM, for manual use, provides optimum slide of the rope locking immediately when falling. An excellent tool for positioning or restraint if the rope grab arrestor is positioned on the rope manually.


For use with 14 mm, 3 strand twisted rope
Opening system with double safety
Automatic locking system
Manual auto-locking lever
Single strap
Excellent for positioning or restraint
Guaranteed optimum slide
Snap hook
Ensures safety
Net weight 1.05 kg
System breaking strength 1500 daN


High strength steel
Yellow electro-zinc played finish


Strength 2500 daN
Opening 18 mm
High strength steel
Nickel plated


250 mm wide polyamide
Breaking strength 1500 daN


EN 353/2 0082/037/160/04/94/0030

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:


existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

คุณสมบัติ / Specifications
คุณสมบัติ Value
Lifeline Material Steel
4 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 5,181.04
(exc. VAT)
THB 5,543.71
(inc. VAT)
Per unit
1 +
Related Products
REBEL galvanised cable self-retracting lifelines are durable, do ...
REBEL galvanised cable self-retracting lifelines are durable, do not compromise safety and operate to a high standard. The housing for the cable is heavy-duty thermoplastic and also includes a built-in ergonomic carrying handle and a side cable exit. A top ...
The Rebel™ self retracting lifeline (SRL) line is ...
The Rebel™ self retracting lifeline (SRL) line is built to last providing an economical fall protection solution without compromising performance or safety. The Rebel™ 3-Way SRL features a built-in emergency retrieval winch, 140kg user capacity and a robust design ensuring ...
The block allows falls to be arrested and ...
The block allows falls to be arrested and is designed to enable easy retrieval of a fall victim. Multi-purposeFall arrest modeWinch modeGalvanised steel wire ropeRobust & durable plastic casingSwivel anchorage eyeSteel swivel hook with load indicatorBreaking strength 15 kNWeight 14.80 ...
Robust & durable plastic casingSwivel anchorage eyeSteel swivel ...
Robust & durable plastic casingSwivel anchorage eyeSteel swivel hook with load indicatorScrew locking aluminium karabinerGalvanised steel wire ropeBreaking strength 15 kNRS 861-0488 : length 5m, weight 3,97 kgRS 861-0497 : length 15m, weight 6.55 kg.