220-42779J, 64 Way Double Sided DIN 41612 Extender Board FR4

  • RS Stock No. 502-168
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 220-42779J
  • ผู้ผลิต / Manufacturer Vero Technologies
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
ไม่สอดคล้อง
COO (Country of Origin): GB
รายละเอียดสินค้า / Product Details

Width Adaptable Extender Board (PTH)

Double sided pth glass fibre extender boards for use with both 160mm and 220mm deep Eurocards in 64-way or 96-way DIN 41612 connector options.

Plug link facility for disconnection of each line allows voltage/logic status checks etc.
Plug links arranged in rows of 32
Fitted at each end with DIN41612 indirect edge connectors
64-way fitted with connector for logic analyser or bus termination (provision for one on 96-way)

Note

By using additional extender boards and optional spacer kit, extenders may be constructed for 6U, 9U, 12U widths etc.

Supplied with

2 support arms/ejectors

PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Type Extender Board
Connection DIN 41612
Number of Contacts 64
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
FR Material Grade FR4
Thickness 1.6mm
Width 160 mm, 220 mm
ขออภัย เราไม่สามารถตรวจสอบสต็อคสินค้าได้ในเวลานี้ โปรดรีเฟรชเพจอีกครั้ง
ราคา / Price Each
THB 9,375.25
(exc. VAT)
THB 10,031.52
(inc. VAT)
Units
Per unit
1 +
THB9,375.25
Related Products
Adaption circuit board for Molex FPC/FFCEpoxy fibre-glass FR4 ...
Description:
Adaption circuit board for Molex FPC/FFCEpoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop mask50 solder pads with 1.00 mm pitch50 solder pads with 0.50 mm pitchHole spacing 2.54 mm2 Pick-up-holes Ø 3.20 mm.
Adaption circuit board for QFP44 and QFn44 (0.50 ...
Description:
Adaption circuit board for QFP44 and QFn44 (0.50 mm pitch)Epoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop maskHole spacing 2.54 mmExternal switching options on the bottom side with 0603 SMD-Pads one pin eachResistors or ...
Adaption circuit board for QFP32 and QFN32 (0.80 ...
Description:
Adaption circuit board for QFP32 and QFN32 (0.80 mm pitch)Epoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop maskHole spacing 2.54 mmExternal switching options on the bottom side with 0603 SMD-Pads one pin eachResistors or ...
Adaption circuit board for QFP32 & QFN32 (0.50 ...
Description:
Adaption circuit board for QFP32 & QFN32 (0.50 mm pitch)Epoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop maskHole spacing 2.54 mmExternal switching options on the bottom side with 0603 SMD-Pads one pin eachResistors or ...