Analog Devices ADE7878AACPZ Energy Meter IC, 24 bit, 40-Pin LFCSP

  • RS Stock No. 877-6367
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. ADE7878AACPZ
  • ผู้ผลิต / Manufacturer Analog Devices
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

ADE7854/7858/7868/7878 Series, Polyphase Multifunction Energy Metering IC, Analog Devices

The ADE7854, ADE7858, ADE7868, and ADE7878 from Analog Devices are high accuracy, 3-phase electrical energy measurement ICs with serial interfaces and three flexible pulse outputs.

Incorporated into these devices are second-order sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), a digital integrator and reference circuitry. In addition these ICs have the signal processing required to perform energy measurement and rms calculations. A fixed function digital signal processor (DSP) executes this processing, with the DSP program being stored in the internal ROM memory.

Features

Highly accurate – supports EN 50470-1, EN 50470-3, IEC 62053-21, IEC 62053-22, and IEC 62053-23 standards
Compatible with 3-phase, 3 or 4-wire (delta or wye), and other 3-phase services
Supports current transformer and di/dt current sensors
Supplies sampled waveform data on all three phases and on neutral current
Selectable no load threshold levels for total and fundamental active and reactive powers, as well as for apparent powers
Battery supply input for missing neutral operation
Phase angle measurements in both current and voltage channels with a typical 0.3° error
Flexible I2C, SPI, and HSDC serial interfaces
Less than 0.1% error in active and reactive energy over a dynamic range of 1000 to 1 at TA = 25°C
Less than 0.2% error in active and reactive energy over a dynamic range of 3000 to 1 at TA = 25°C
Less than 0.1% error in voltage and current rms over a dynamic range of 1000 to 1 at TA = 25°C

Energy/Power Measurement - Analog Devices

คุณสมบัติ / Specifications
คุณสมบัติ Value
Resolution 24 bit
Conversion Rate 8ksps
Mounting Type Surface Mount
Package Type LFCSP
Pin Count 40
Dimensions 6.1 x 6.1 x 0.75mm
Length 6.1mm
Width 6.1mm
Height 0.75mm
Maximum Operating Supply Voltage 3.7 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 2.8 V
Minimum Operating Temperature -40 °C
30 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 4-6 วันทำการ (working days)
ราคา / Price Each
THB 404.18
(exc. VAT)
THB 432.47
(inc. VAT)
Units
Per unit
1 - 9
THB404.18
10 - 49
THB388.64
50 - 99
THB374.76
100 - 249
THB362.26
250 +
THB350.94
ตัวเลือกบรรจุภัณฑ์ / Packaging Options :
Related Products
ACM3P series 3-phase AC ammeters measure and display ...
Description:
ACM3P series 3-phase AC ammeters measure and display the true-RMS values of 2- or 3-phase ac mains current. A front panel touch switch enables the selection of a continuous reading of any of the three phases. All ACM3P ammeters are ...
The ND10 is a digital programmable power meter ...
Description:
The ND10 is a digital programmable power meter designed to measure 3 phase, 4-wire power network parameters in both balanced and unbalanced systems. It displays measured quantities and their simultaneous digital transmission. The power meter also controls and optimises the ...
The N14 is a digital programmable power meter ...
Description:
The N14 is a digital programmable power meter designed to measure 3 phase, 3 or 4-wire power network parameters in balanced or unbalanced systems. It displays measured quantities and their simultaneous digital transmission. The power meter also controls and optimises ...
The Sentron PAC5100 series is a digital power ...
Description:
The Sentron PAC5100 series is a digital power meter that allows you to record, display and transfer electrical measured values up to the 40th harmonic component. The meter is a specialist solution for measured value acquisition and provides important data ...