AC164112, Chip Programming Adapter Voltage Limiter for Microchip Header Board

  • RS Stock No. 667-7892
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. AC164112
  • ผู้ผลิต / Manufacturer Microchip
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

ICD 2 In-Circuit Debugger/Programmer Evaluation Kit

In-Circuit Debugger (ICD 2) allows the debugging of a range of PIC microcontrollers through the MPLAB® Integrated Development Environment (IDE). The ICD 2 module connects between the PC and the user's target board allowing direct in-circuit debugging of the target microcontroller in real time. A range of header interfaces is available to allow users to connect the ICD 2 to their target board IC socket where a suitable ICD modular connection is not available.

USB (full speed 2Mbits/sec) and RS-232 interface to host PC
Real-time background debugging
Firmware upgradable from the PC
Supports low voltage target systems (+2.0 to +6.0V)
Diagnostic LEDs (Power, Busy, Error)
Reading/Writing memory space and stack of target microcontroller
Freeze on halt

USB (full speed 2MB/second), RS-232 interface for host PC
Real-time background debugger
Firmware can be upgraded from PC
Supports low voltage target system (+2.0 to +6.0V)
Diagnostic LED(power, busy, error)
Read/write target microcontroller's memory space and stack
Freezes when paused

The ICD 2 uses MPLAB IDE (Integrated Development Environment) graphical user interface enabling various PIC microcontroller debuggers. It can be connected to PCs and user target boards with MPLAB ICD 2 modules and can directly connect with the target microcontroller in-circuit debugger in real time. A header interface is provided so by using this, the MPLAB ICD 2 can be connected to the target board IC socket when the suitable ICD module connection cannot be used.

Supplied with

Kit only: ICD interface cable, USB cable, RS-232 cable, PSU and PICDEM™ 2 Plus Demonstration Board - DV163022

คุณสมบัติ / Specifications
คุณสมบัติ Value
Accessory Type Voltage Limiter
For Use With Microchip Header Board
2 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 463.16
(exc. VAT)
THB 495.58
(inc. VAT)
Units
Per unit
1 +
THB463.16
Related Products
The NCP2809B is a cost-effective fixed gain stereo ...
Description:
The NCP2809B is a cost-effective fixed gain stereo audio power amplifier capable of delivering 135 mW of continuous average power per channel into 16 ohm loads. This device has been specifically designed to provide high quality output power from low ...
The USB-COM-PLUS modules provide a simple method of ...
Description:
The USB-COM-PLUS modules provide a simple method of adapting legacy serial devices with RS-232, RS-422 or RS-485 interfaces to modern USB ports. The USB-COM232-PLUS1 module is a single channel USB to RS-232 communication device. Utilises the FTDI FT232RThe USB-COM232-PLUS2 module ...
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC ...
Description:
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in ...
The LV8402GP is a 2ch forward/reverse motor driver ...
Description:
The LV8402GP is a 2ch forward/reverse motor driver IC using D-MOS FET for its output stage. As MOS circuit is used, it supports the PWM input. It also provides protection functions such as heat protection circuit and reduced voltage detection ...