LCBSB-10-01A2-RT, 15.9mm High Nylon PCB Support for 4mm PCB Hole, 17.8 x 17.8mm Base

  • RS Stock No. 721-4708
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. LCBSB-10-01A2-RT
  • ผู้ผลิต / Manufacturer Richco
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
รายละเอียดสินค้า / Product Details

Standard Adhesive Backed Supports

PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm

คุณสมบัติ / Specifications
คุณสมบัติ Value
Overall Height 26.1mm
Body Height 15.9mm
Support Base Dimensions 17.8 x 17.8mm
PCB Hole Diameter 4mm
PCB Thickness 1.6mm
Material Nylon
Support Base Length 17.8mm
Support Base Width 17.8mm
สินค้าหมดชั่วคราว (Temporarily out of stock) - จะเป็นแบ๊คออเดอร์จัดส่ง (back order for despatch) 26/05/2020, จัดส่งภายใน (delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each: (In a Pack of 40)
THB 7.691
(exc. VAT)
THB 8.229
(inc. VAT)
Units
Per unit
Per Pack*
40 - 360
THB7.691
THB307.64
400 - 760
THB7.537
THB301.48
800 - 1960
THB7.419
THB296.76
2000 +
THB7.10
THB284.00
*ตัวบ่งบอกราคา / price indicative
Related Products
PCB supports moulded in nylon, with an adhesive ...
Description:
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fittingThe board to be supported is retained securely by the locking barb, but may be removed when requiredThe support can be permanently ...
Spacers for printed circuit boards featuring an adhesive ...
Description:
Spacers for printed circuit boards featuring an adhesive base (0.8 mm).
ApplicationsFor use in multi-level applications. Self-adhesive base eases ...
Description:
ApplicationsFor use in multi-level applications. Self-adhesive base eases assembly. Fixed to the panel by clip.
PCB spacers with an adhesive base (0.8 mm ...
Description:
PCB spacers with an adhesive base (0.8 mm thick).Small dimensions, adhesive surface area just 12.7 x 12.7 mm.