Heat Guns

Heat Guns are a hand held tool that uses a stream of hot air which is heated by a built-in element at temperatures between 100°C and 550°C. Heavy duty heat guns operate at hotter temperatures of plus 700°C. Heat Guns allow you to concentrate the heat onto a targeted area or surface also give you control using the on and off trigger.
If you need advice on how to use these tools, you can consult our Heat Guns Guide.

How A Heat Gun Works:
The heat used by the Heat Gun is produced by a fan built into the back of the gun within the gun which draws air in and then passes the cold air over the heating elements which then creates the required stream of hot air.

How To Use A Heat Gun:
Heat Guns should be held at an angle of 45° from the area you target but never hold the stream of heated air in one place for more than a few seconds as you could damage and burn your work surface. When stripping paint from a surface use the Heat Gun to soften the paint until it bubbles and blisters. Remove the Heat Gin from the surface then use a scraper to remove the paint from the work surface.

Uses for Heat Guns:
  • Stripping Paint including lead paint (lead paint, use temperatures below 590° minimising vaporisation)
  • Heat Shrink Tubing
  • Shrink Film
  • Shrink Wrap Packaging
  • Wood - helps to dry out damp wood
  • Plastic – assists help in welding, bending and shaping plastic
  • Adhesive softening
  • Thawing frozen pipes
  • Electronics – De-soldering
  • Rework surface-mounted circuit boards

อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 8 รายการจาก 8 รายการ / Viewing 1 - 8 of 8 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Maximum Airflow Wattage Voltage Rating Maximum Operating Temperature Plug Type Outlet Diameter Weight Model Number
RS Stock No. 520-2920
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.012694
Brand :Steinel
500L/min 1.4kW 110V +650°C BS 4343 34mm 940g HG2320E
RS Stock No. 522-2198
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.012700
Brand :Steinel
500L/min 2.3kW 230V +650°C Type C - EuroPlug 34mm 940g HG2320E
RS Stock No. 325-3190
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.3501541
Brand :Steinel
800L/min 3.4kW 230V +600°C Type G - British 3-pin 50mm 1.2kg HG5000E
RS Stock No. 104-367
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.21898000
Brand :Rapid
500L/min 2kW 220 → 240V ac +600°C Type C - EuroPlug - 1.2kg -
RS Stock No. 520-2914
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.009663
Brand :Steinel
500L/min 2.3kW 240V +650°C Type G - British 3-pin 34mm 940g HG2320E
RS Stock No. 325-3184
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.0126011
Brand :Steinel
500L/min 2.3kW 110V +700°C BS 4343 30mm 840g HG2620E
RS Stock No. 146-8764
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SLS.GKIT1-GUN
Brand :Facom
- - - - - - - SLS.G
ใหม่ / New
RS Stock No. 188-3888
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.E.2015
Brand :Facom
250 (Mode1) L/min, 500 (Mode2) L/min 2000W 220 → 240V +600°C Type C - EuroPlug 72mm 980g E.2015
Related Products
Electric hot-air gun.Double insulationVariable temperature setting.For stripping paint ...
Electric hot-air gun.Double insulationVariable temperature setting.For stripping paint or varnish, removing an adhesive surface, loosening nuts or screws, thawing frozen pipes, etc.Reduction nozzles gradually reduce the flow of air for precision work.Nozzles with deflectors direct the flow of hot air ...
Electric fastener for staples and brad nails. Ergonomic ...
Electric fastener for staples and brad nails. Ergonomic soft grip handle for comfortAccepts heavy duty staples up to 14mm and brads up to 15mmEasy access staple & brad insertion for quick loadingHi/Lo adjustment for wide range of applicationsExtra long cord ...
Stanley TRE650- Electric Nailer, offers soft grip for ...
Stanley TRE650- Electric Nailer, offers soft grip for fatigue free working, force adjustment for perfect finishes on different materials. • For heavy-duty applications • Easy to load • Anti-lock mechanism • Viewing window • Power adjustment according to the type ...
This soldering reflector nozzle is for 10 mm ...
This soldering reflector nozzle is for 10 mm soldering and shrink fitting. Works with Steinel hot air guns. Continuously adjustable temperature and airflowElectronically monitored temperature range and airflowTemperature display with actual and set temperatureSupplied with one reduction, surface and reflector ...