Tyre Pressure Gauges

Tyre pressure gauges are used to measure the pressure of the tyres on a vehicle. Some tyres are rated to specific loads at certain pressures, it is important to keep the pressure of the tyre at the optimal rating.
There are three types of pressure gauges:

Stick: These are long metal sticks with rods that slide out of the valve end and connects to the valve stem of the tyre. To use it, take the open end of the stick gauge valve and press firmly. The white stem begins to push out the other end and indicate a number, probably between 20 PSI and 40 PSI.

Dial: These gauges have a small clock like faces on them that resemble a speedometer. After taking off the valve cap on the tyre, apply the valve end of the gauge. Wait for the needle on the face to stop moving to read the pressure.

Digital: These gauges are similar to dial gauges, but they use an electronic LCD display to show the pressure.

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 3 รายการจาก 3 รายการ / Viewing 1 - 3 of 3 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Pressure Gauge Type Best Accuracy Maximum Pressure Measurement Bar Maximum Pressure Measurement psi Minimum Pressure Measurement Bar Minimum Pressure Measurement psi
RS Stock No. 499-8888
Brand :RS PRO
THB1,091.67
Each
Units
Dial - 4bar 60psi 0bar 0psi
RS Stock No. 499-8872
Brand :RS PRO
THB517.86
Each
Units
Dial ±1.5 psi 4.5bar 60psi 0bar 0psi
RS Stock No. 195-9739
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.RSTPG6H03
THB1,837.14
Each
Units
- - 11bar 160lbf/in² 0.8bar 10lbf/in²
Related Products
Suitable for all gaseous and liquid media that ...
Description:
Suitable for all gaseous and liquid media that will not obstruct the pressure system or attack copper alloy parts. Bourdon tube operating principleDual scale - calibrated in bar and psiAmbient operating temperature -40 to +60°CMedium operating temperature +60°C (max)Accuracy ±2.5% ...
MEX Industrial pressure gauge, Nominal size 63 mm. ...
Description:
MEX Industrial pressure gauge, Nominal size 63 mm. For corrosive gasses and liquidsClass 1.6 according to EN 837-1Wetted parts: Stainless steelCase with crimped bezel ringLloyds Register ApprovalOption: Liquid-filled for applications with pulsations or vibrationsOption: Case material 1.4404 (316L) for aggressive ...
Suitable for corrosive environments and gaseous or liquid ...
Description:
Suitable for corrosive environments and gaseous or liquid media that will not destruct the pressure system. Laminated Safety Glass Window316TI Stainless Steel Element & Movement304 stainless Steel case with G 1/2 in. BSPM connection Bottom entry connectionAmbient Operating Temperature between ...
Moveable red pointer which can be set at ...
Description:
Moveable red pointer which can be set at normal operating pressureSealed alloy Bourdon springDual scale: bar and psiABS Case with Acrylic Window1/4 in. BSP Taper Male Centre Back ConnectionTemperature Resistant to 120°C.