Continuity Testers

A Continuity Tester can sometimes be referred to as an "Electrical Tester", "Electrical Test Equipment", "Voltage Continuity Tester" or a "Circuit Tester". A Continuity Tester is a type of electrical testing equipment, predominantly used to test for an electrical path between two given points. If an electrical current is found, the circuit that is being tested on can be safely de-energised before being connected to any other equipment.



How do Continuity Testers work?



The test equipment holds an electrical current indicator, which sits between the two test leads and probes. Whilst performing a test, if a circuit is established and a current or voltage is found then the indicator will be activated. This indicator may be in the form a light or buzzer, alternatively there are audible Continuity Checkers that will omit a beeping noise if power or a current is found during.



What are Continuity Testers for?



A Continuity checker is used to perform a continuity test on apparatus, to determine if a connection has been made correctly or if one is apparent between two points. This tester also helps with the indication and detection of two points that are connected, that possibly shouldn't be.



RS Components supply a generous variety of Continuity Testers, brought to you from leading brands such as Catu, Martindale and of course our trusted own brand RS Pro.


...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 4 รายการจาก 4 รายการ / Viewing 1 - 4 of 4 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Test Current Visual Indicator Display Type Probe Voltage Battery Life Battery Type Weight Dimensions Height Length Maximum Operating Temperature Minimum Operating Temperature Model Number p Width
ใหม่ / New
RS Stock No. 193-8690
Brand :RS PRO
THB2,013.40
Each
Units
- Yes LED 240V - 9V 120g 64 x 42 x 192mm 192mm 64mm +40°C 0°C - 42mm
RS Stock No. 254-263
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.TEK 404
Brand :Martindale
THB2,014.31
Each
Units
5mA - LED 9V - 9V 185g 150 x 64 x 30mm 30mm 150mm +40°C -5°C TEK 404 64mm
ใหม่ / New
RS Stock No. 196-8016
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.P01299926
THB11,504.88
Each
Units
- Yes LCD - 30000 measurements 4 x AA - 225 x 185 x 135mm 135mm 225mm - - CA 6011 185mm
RS Stock No. 255-604
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.RSTEK402
Brand :Martindale
THB1,693.85
Each
Units
50µA No LED 2.2V dc - 9V 260g 50 x 64 x 30mm 30mm 50mm - - TEK 402 64mm
Related Products
The FLIR high-quality voltage, continuity and current testers ...
Description:
The FLIR high-quality voltage, continuity and current testers have 100A/600V measuring range. This electrical tester is ideal for electricians who troubleshoot and verify electrical system. They feature an optimized, open-jaw design that can fit into tight spaces and reliably measure ...
Kits for performing tests required by NF C ...
Description:
Kits for performing tests required by NF C 15-1001 DT-170 (differential controller)1 DT-300 (earth and continuity measuring device and extension cord)1 M-9955538 (diagnostic book 15-100)1 DT-500* (Insulation controller and connectors).
An essential testing accessory to facilitate fast and ...
Description:
An essential testing accessory to facilitate fast and safe testing for loop impedance, and R1 & R2 testing of lighting circuitsReduces the need to hold test probes in placePositive connection of test leads to lamp holdersEN61010-1 CAT II 300V.
Single pole voltage tester from Wera. Made from ...
Description:
Single pole voltage tester from Wera. Made from chrome-vanadium steel with hardened blade tips. Offers a neon indicator fully sealed to prevent tampering. Resistor protection for safety. • Slotted: 3.0 x 70 mm• Fully rated 1000 V• Individually tested to ...