Bench Power Supplies

A bench power supply is an essential piece of equipment if you do a lot of electronics or other powered projects on your bench and need a reliable source of power at different voltages. They are very useful tools in testing circuits, as they allow you to adjust the voltage to a specific value depending on what project you are working on. A variable DC bench power supply also allows you to set a maximum current, so if there is a short circuit in your project the bench supply will shut down hopefully preventing any harm to some components in your project. Bench power supplies are versatile, accurate and stable and don’t cost too much.

When it comes to power you have 4 units to be aware of, Current, Voltage, Power and Resistance. It’s very important that if you are supplying your circuit with some voltage, your supply can keep up with the current drawn.

There are two basic types of power supplies in common use: linear and switch-mode. Both are available for use as bench DC power supplies.

Linear power supplies operate by rectifying AC line power to create DC, and then filtering and regulating it to produce user-selectable voltage or current levels. Linear supplies are heavier because the 50 Hz or 60 Hz transformer and associated filters are physically larger.
Switch-mode power supplies start out the same way, rectifying and filtering AC line input voltage, however they chop (or "switch") the DC into high-frequency AC. Switch-mode power supplies are significantly smaller, lighter and more efficient than linear power supplies, so they have replaced linear supplies in many applications.

Areas of application:
● General laboratory
● Education
● Industry
● Research
● Production
● Workshops

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 5 รายการจาก 5 รายการ / Viewing 1 - 5 of 5 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Output Voltage Output Current Number of Outputs Type Power Rating Supply Voltage Number of Displays Input Connector Output Connector Calibrated Minimum Temperature Maximum Temperature
RS Stock No. 447-7577
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.KAT 10VD
Brand :Kert
THB5,370.45
Each
Units
0 → 15V 10A 1 Digital - 230V ac 1 Schuko Plug Binding Post Terminal - -10°C +40°C
RS Stock No. 257-6953
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.KAT5
Brand :Kert
THB2,777.84
Each
Units
12 V, 13.8 V 4 A, 5 A 1 Analogue - 230V ac - Schuko Plug Binding Post Terminal - -10°C +40°C
RS Stock No. 257-6969
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.KAT10
Brand :Kert
THB3,128.65
Each
Units
12 V, 13.8 V 6A 1 Analogue - 230V ac - Schuko Plug Binding Post Terminal - 0°C +50°C
RS Stock No. 360-0007
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.AT5VD
Brand :Kert
THB4,276.36
Each
Units
0 → 15V 5A 1 Digital - 230V ac 1 IEC 320 Binding Post Terminal - -10°C +40°C
RS Stock No. 303-0363
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.K-AT5V
Brand :Kert
THB3,410.97
Each
Units
24V 4 A, 5 A 1 Analogue - 230V ac - Schuko Plug Binding Post Terminal - -10°C +40°C