Rod Ends

A rod end (or rose joint) is a type of bearing that has a circular head with an opening and a threaded shaft attached. It is a type of mechanical articulating joint. They are often used in the automotive industry and can also be found in industrial machinery, boats, and remote control helicopters.Types of Rod EndThey are available with the following variations:Female (internal) or male (external) threadsLeft or right hand threadMetric or imperial sizingLining materials

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 20 รายการจาก 761 รายการ / Viewing 1 - 20 of 761 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Connection Size Bore Size Dynamic Load Rating Static Load Rating Overall Length Material Connection Thread Size Connection Thread Standard Maximum Operating Temperature Minimum Operating Temperature Connection Gender
RS Stock No. 198-9083
Brand :RS PRO
THB576.21
Each
Units
M8 x 1.25 Male 8mm 14300N 7900N 53mm Steel M8 x 1.25 Metric - - Male
RS Stock No. 198-9099
Brand :RS PRO
THB612.99
Each
Units
M10 x 1.5 Male 10mm 20000N 10700N 61mm Steel M10 x 1.5 Metric - - Male
RS Stock No. 198-9156
Brand :RS PRO
THB1,524.93
Each
Units
M20 x 1.5 Male 20mm 62900N 30500N 101mm Steel M20 x 1.5 Metric - - Male
RS Stock No. 198-8951
Brand :RS PRO
THB525.29
Each
Units
M6 x 1 Female 6mm 8600N 5000N 39mm Steel M6 x 1 Metric - - Female
RS Stock No. 198-8973
Brand :RS PRO
THB616.76
Each
Units
M10 x 1.5 Female 10mm 20000N 10700N 56mm Steel M10 x 1.5 Metric - - Female
RS Stock No. 382-273
Brand :RS PRO
THB973.37
Each
Units
M5 x 0.8 Male 5mm - 3460N 41mm Steel M5 x 0.8 Metric - - Male
RS Stock No. 382-245
Brand :RS PRO
THB712.01
Each
Units
M2 x 0.4 Male 2mm - 410N 22.5mm Steel M2 x 0.4 Metric - - Male
RS Stock No. 382-251
Brand :RS PRO
THB872.33
Each
Units
M3 x 0.5 Male 3mm - 1220N 33mm Steel M3 x 0.5 Metric - - Male
RS Stock No. 382-318
Brand :RS PRO
THB803.96
Each
Units
M5 x 0.8 Female 5mm - 5600N 35mm Steel M5 x 0.8 Metric - - Female
RS Stock No. 198-9011
Brand :RS PRO
THB1,208.06
Each
Units
M16 x 2 Female 16mm 42900N 21500N 83mm Steel M16 x 2 Metric - - Female
RS Stock No. 198-8967
Brand :RS PRO
THB655.90
Each
Units
M8 x 1.25 Female 8mm 14300N 7900N 47mm Steel M8 x 1.25 Metric - - Female
RS Stock No. 198-9061
Brand :RS PRO
THB513.50
Each
Units
M5 x 0.8 Male 5mm 6700N 3400N 41mm Steel M5 x 0.8 Metric - - Male
RS Stock No. 176-1608
Brand :RS PRO
THB815.80
Each
Units
M10 x 1.25 Female 10mm - 3100kg 58mm Steel M10 Metric - - Female
RS Stock No. 176-1574
Brand :RS PRO
THB3,970.81
Each
Units
M20 x 1.5 Female 20mm - 8300kg 102mm Steel M20 Metric - - Female
RS Stock No. 382-295
Brand :RS PRO
THB815.28
Each
Units
M3 x 0.5 Female 3mm - 3600N 27mm Steel M3 x 0.5 Metric - - Female
RS Stock No. 176-1568
Brand :RS PRO
THB761.32
Each
Units
M8 x 1.25 Female 8mm - 1900kg 48mm Steel M8 Metric - - Female
RS Stock No. 303-4040
Brand :RS PRO
THB1,184.96
Each
Units
M16 x 1.5 Female 16mm - 1800N 85mm Steel M16 x 1.5 Metric +150°C -30°C Female
RS Stock No. 382-302
Brand :RS PRO
THB1,566.90
Each
Units
M4 x 0.7 Female 4mm - 4500N 31mm Steel M4 x 0.7 Metric - - Female
RS Stock No. 198-9033
Brand :RS PRO
THB1,751.74
Each
Units
M20 x 1.5 Female 20mm 62900N 30500N 100mm Steel M20 x 1.5 Metric - - Female
RS Stock No. 198-8945
Brand :RS PRO
THB581.87
Each
Units
M5 x 0.8 Female 5mm 6700N 4100N 35mm Steel M5 x 0.8 Metric - - Female
Related Products
Rod Ends with male thread and PTFE liner. ...
Description:
Rod Ends with male thread and PTFE liner. For use at high dynamic pressure and tension loads in corrosive environments.
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: BrassSliding contact surfaces: Steel/Brass.
Ball: 440C Stainless Steel, heat treated, HRC56 min ...
Description:
Ball: 440C Stainless Steel, heat treated, HRC56 min Precision ground, polishedBody: 304 Stainless steelRace: PTFE compositeSliding contact surfaces: Steel/PTFE composite.
Suitable for pneumatic cylinders and coupler mechanisms in ...
Description:
Suitable for pneumatic cylinders and coupler mechanisms in the fields of printing and packing machines, filling plants, labelling machines and mechanical controls. Maintenance free - do not require lubrication.