CV Boots

What are CV joint gaiters?
Constant velocity joint (CV joint) gaiters are a covering used to protect and extend the life of a CV joint. They provide protection from the ingress of dust, dirt and corrosive elements.

What are CV joint gaiters made from?
CV gaiters are typically made from durable synthetic rubbers (such as polychloroprene) or plastic. This ensures that they are resistant to most oils, chemicals and greases. Some models can be filled with grease to help with the lubrication of plain bearing points. Their durable construction gives them a long working life, in which they will need little or no maintenance.

How do you install CV joint gaiters?
Gaiters are incredibly easy to install over a joint. Simply put the gaiter in place over the joint, and use nylon cable ties on the locating ring on the outside of the gaiter. This covers the joint, offering protection while the ties firmly secure the gaiter in place.

In a situation where a double joint is being used, it is advised to use to use two joint gaiters to provide maximum protection to the joint.

Should every joint be covered with a gaiter?
Some joints do not require gaiters to offer additional protection. For example, joints with needle roller bearings will not benefit.

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 18 รายการจาก 18 รายการ / Viewing 1 - 18 of 18 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Size Bore Overall Diameter Overall Length Material Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 790-6848
Brand :RS PRO
THB330.50
Each
Units
4 24.5mm 48mm 50mm Polychloroprene - -
RS Stock No. 790-6851
Brand :RS PRO
THB504.75
Each
Units
4 45mm 84mm 95mm Polychloroprene - -
RS Stock No. 790-6832
Brand :RS PRO
THB317.96
Each
Units
1 15mm 28mm 34mm Polychloroprene - -
RS Stock No. 790-6845
Brand :RS PRO
THB360.81
Each
Units
1 30.5mm 56mm 65mm Polychloroprene - -
RS Stock No. 790-6857
Brand :RS PRO
THB489.84
Each
Units
3 40mm 75mm 82mm Polychloroprene - -
RS Stock No. 790-6860
Brand :RS PRO
THB567.02
Each
Units
5 50mm 92mm 108mm Polychloroprene - -
RS Stock No. 790-6839
Brand :RS PRO
THB329.56
Each
Units
3 20.5mm 40mm 45mm Polychloroprene - -
RS Stock No. 790-6841
Brand :RS PRO
THB322.22
Each
Units
5 27.5mm 52mm 56mm Polychloroprene - -
RS Stock No. 790-6854
Brand :RS PRO
THB361.28
Each
Units
2 35.5mm 66mm 72mm Polychloroprene - -
RS Stock No. 790-6835
Brand :RS PRO
THB328.14
Each
Units
2 16.5mm 32mm 40mm Polychloroprene - -
RS Stock No. 264-5453
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.143.17
Brand :Huco
THB228.23
Each
Units
- 16.5mm 32mm 40mm Rubber +100°C -20°C
RS Stock No. 264-5469
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.143.26
Brand :Huco
THB216.86
Each
Units
- 24.5mm 47mm 52mm Rubber +100°C -20°C
RS Stock No. 264-5475
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.143.29
Brand :Huco
THB276.57
Each
Units
- 27.5mm 51mm 58mm Rubber +100°C -20°C
RS Stock No. 265-1694
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.143.20
Brand :Huco
THB192.48
Each
Units
- 20.5mm 39mm 47mm Rubber +100°C -20°C
RS Stock No. 264-5504
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.143.45
Brand :Huco
THB463.68
Each
Units
- 45mm 83mm 97mm Rubber +100°C -20°C
RS Stock No. 264-5510
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.143.50
Brand :Huco
THB534.34
Each
Units
- 50mm 93mm 110mm Rubber +100°C -20°C
RS Stock No. 264-5497
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.143.40
Brand :Huco
THB395.85
Each
Units
- 40mm 75mm 84mm Rubber +100°C -20°C
RS Stock No. 264-5481
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.143.32
Brand :Huco
THB330.98
Each
Units
- 30.5mm 56mm 67mm Rubber +100°C -20°C
Related Products
The bellows is a traditional mechanism for flexibly ...
Description:
The bellows is a traditional mechanism for flexibly connecting two rotating shafts with angular, parallel and axial offset capability. Can be used with the RS range of bore reducers. High torsional stiffnessHigh quality of translation of motionSuitable for drives associated ...
High torsional stiffness for positional accuracy Low inertia ...
Description:
High torsional stiffness for positional accuracy Low inertia Ideal for servo drive applications with high precision dynamic position control Material: Aluminium hub; stainless steel bellows.
A comprehensive range of light duty universal joints ...
Description:
A comprehensive range of light duty universal joints manufactured in non-ferrous metals and Acetal, with a -40 to 85°C operating range. Corrosion resistant constructionFreedom from backlashNo lubrication requiredElectrical isolation between shaftsAvailable with metric or imperial bore sizes at both ends, ...
Sub-miniature steel universal joints suitable for use in ...
Description:
Sub-miniature steel universal joints suitable for use in model making, instrumentation and other miniature applications.