Pneumatic Grippers

Pneumatic grippers are devices designed to hold an object using pneumatic, electric or hydraulic operated jaws or fingers. Grippers can be used as single devices or as a part of pick and place, manufacturing systems. Grippers can be used to pick up/hold various size objects from very small items such as semiconductors to very large items like car chassis or engines. Grippers are frequently added to industrial robots in order to allow robots interactions with objects.Grippers can be divided into 2 main categories by type of holding objects: External – the simplest and most popular method of holding objects. When the gripper jaws close, the closing force of the gripper holds that object. Internal – When the access to objects exterior is required then an internal grip is necessary. Jaws or finger hold the object from the centre. In this case, the opening force of the gripper is used to hold the object. What to consider when choosing the gripper: Shape , orientation and dimensional variation - If the object has two opposing flat surfaces, then 2 jaw parallel gripper is desired since it can handle some dimensional variation. Jaws can also be designed to handle cylindrical objects with the 2 jaw concept. Keep in mind that a retention or encompassing grip requires much less force. Weight - Grip force must be adequate to secure the object while the desired operation is performed on the object. The type of jaw design must be part of the force requirement. Keep in mind that you should add a safety factor to the amount of force that you select and air pressure is a factor to keep in mind. Accessibility- This applies both to the work being performed on the object and the amount of room for the gripper jaws. If the work is to the exterior of the object then it may require an internal grip. Angular grippers are usually less expensive but require additional space for jaw movement. Environmental - Harsh environment or clean room applications require grippers designed for those purposes. Retention of the Object - When air pressure is lost, the gripper will relax its grip on the object and the object may be dropped. There are spring assist grippers designed for this type application.

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 20 รายการจาก 63 รายการ / Viewing 1 - 20 of 63 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Manufacturer Series Action Number of Fingers Gripping Type Maximum Operating Pressure Absolute Maximum Pressure Cushioning Type Port Connection Weight Size Type
RS Stock No. 700-7348
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHZ2-20D
Brand :SMC
THB15,114.61
Each
Units
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 235g -
RS Stock No. 700-7345
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHZ2-16D
Brand :SMC
THB13,250.77
Each
Units
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 115g -
RS Stock No. 700-7317
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHS3-16D
Brand :SMC
THB17,297.02
Each
Units
MHS3 Double 3 Parallel 0.6 MPa - - M3 x 0.5 60g -
RS Stock No. 700-7332
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHY2-25D
Brand :SMC
THB15,371.69
Each
Units
MHY2 Double 2 Angle 0.6 MPa - - M5 x 0.8 560g -
RS Stock No. 700-7297
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHF2-8D1
Brand :SMC
THB17,880.08
Each
Units
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M3 85g -
RS Stock No. 841-2287
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHC2-16S
Brand :SMC
THB8,290.86
Each
Units
MHC Single 2 Angle 0.25 → 0.6 MPa 0.6MPa Not Cushioned M5 x 0.8 92g -
RS Stock No. 700-7294
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHF2-8D
Brand :SMC
THB18,332.33
Each
Units
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M3 65g -
RS Stock No. 182-5872
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHC2-25D
Brand :SMC
THB11,020.27
Each
Units
MHC2 Double 2 Angle 0.6 MPa - - M5 x 0.8 311g -
RS Stock No. 841-2329
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHZJ2-10DS
Brand :SMC
THB15,416.92
Each
Units
MHZ Double 2 Parallel 0.2 → 0.7 MPa 0.7MPa Not Cushioned M3 x 0.5 60g -
RS Stock No. 768-1625
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHZL2-25D
Brand :SMC
THB20,691.86
Each
Units
MHZL2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 470g -
RS Stock No. 841-2313
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHZ2-16D2
Brand :SMC
THB13,118.07
Each
Units
MHZ Double 2 Parallel 0.1 → 0.7 MPa 0.7MPa Not Cushioned M5 x 0.8 115g -
RS Stock No. 700-7336
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHZ2-10D
Brand :SMC
THB13,012.18
Each
Units
MHZ2 Double 2 Parallel 0.7 MPa - - M3 x 0.5 55g -
RS Stock No. 841-2331
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHZL2-16D
Brand :SMC
THB14,273.08
Each
Units
MHZ Double 2 Parallel 0.1 → 0.7 MPa 0.7MPa Not Cushioned M5 x 0.8 135g -
RS Stock No. 366-3597
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHZ2-10DN
Brand :SMC
THB13,012.18
Each
Units
MHZ2 Double 2 Parallel 0.7 MPa - - M3 x 0.5 55g -
RS Stock No. 700-7351
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHZ2-6D
Brand :SMC
THB12,403.70
Each
Units
MHZ2 Double 2 Parallel 0.7 MPa - - M3 x 0.5 27g -
RS Stock No. 233-2113
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHL2-10D
Brand :SMC
THB15,600.10
Each
Units
MHL2 Double 2 Parallel 0.6 MPa - - M5 x 0.8 280g -
RS Stock No. 182-5850
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHC2-16D
Brand :SMC
THB8,290.86
Each
Units
MHC2 Double 2 Angle 0.6 MPa - - M5 x 0.8 91g -
RS Stock No. 700-7310
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHS3-25D
Brand :SMC
THB20,092.55
Each
Units
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 140g -
RS Stock No. 245-0003
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHS3-20D
Brand :SMC
THB19,025.38
Each
Units
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 100g -
RS Stock No. 700-7314
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MHS3-32D
Brand :SMC
THB16,735.26
Each
Units
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 237g -
Related Products
The MHF two finger pneumatic gripper compact design ...
Description:
The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for ...
The MHS series parallel style air grippers have ...
Description:
The MHS series parallel style air grippers have been designed for applications requiring a high degree of accuracy in a wide range of environments. They use a wedge cam mechanism for the finger action giving high accuracy. The grippers are ...
Double actingOperating pressure 1 – 6 barTemperature range ...
Description:
Double actingOperating pressure 1 – 6 barTemperature range 0°C to 60°COpening angle 30°(open), 10°(closed)Holding moment at 5 bar is 0.1Nm (10mm bore), 0.4Nm (16mm), 0.7Nm (20mm), 1.4Nm (25mm)Repeatability of closing position ±0.01mmMaximum operating frequency 180cpmLubrication not required.
The MHF two finger pneumatic gripper compact design ...
Description:
The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for ...