Hydraulic End Sleeves

Hydraulic end sleeves are a type of spacer used in flared-tube hydraulic fittings. The end sleeve slides onto the tube before it's flared. A range of flaring tools can be used to create a flared tube end, usually at an angle of 37°. The hydraulic end sleeve sits between the flared tube end and the threaded nut, helping to hold the nut in the correct position. The fitting nose forms a seal with the tube end when the nut is tightened.

What are hydraulic end sleeves used for?

This type of fitting is ideally suited to low- and medium-pressure applications, for use with machine tools, agricultural equipment, earth moving machinery, automation, chemical processing systems and other hydraulic applications.

Types of hydraulic end sleeves

Hydraulic end sleeves are most commonly made of zinc-plated steel and come in varying sizes. Product specifications include external tube diameter and sleeve length (in millimetres). Like the other components of a flared fitting, you'll need to check the end sleeves have the correct specifications. These include maximum operating pressure (in bars) and maximum and minimum operating temperature. Working pressures will vary somewhat depending on tube and fitting size.


...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 4 รายการจาก 4 รายการ / Viewing 1 - 4 of 4 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price For Tube Outside Diameter Overall Length Finish Material Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 302-8247
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.TXS20
Brand :Parker
THB60.847
Each: (In a Pack of 10)
Units
20mm 17mm Zinc Plated Steel 350 bar +120°C -40°C
RS Stock No. 302-8196
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.TXS12
Brand :Parker
THB21.059
Each: (In a Pack of 10)
Units
12mm 14mm Zinc Plated Steel 350 bar +120°C -40°C
RS Stock No. 302-8168
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.TXS8
Brand :Parker
THB26.138
Each: (In a Pack of 10)
Units
8mm 11mm Zinc Plated Steel 350 bar +120°C -40°C
RS Stock No. 302-8152
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.TXS6
Brand :Parker
THB24.282
Each: (In a Pack of 10)
Units
6mm 10mm Zinc Plated Steel 350 bar +120°C -40°C
Related Products
Curved tooth gear couplings to compensate for axial, ...
Description:
Curved tooth gear couplings to compensate for axial, radial and angular shaft displacement. Each coupling comprises of three parts (sold separately) two coupling hubs and a gear coupling sleeve. Available in various sizes from 14 mm to 32 mm. Maintenance ...
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when ...
Description:
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when machine shaft surfaces have been damaged or worn in operation. SKF SPEEDI-SLEEVES eliminate the typical need to replace or rework damaged shafts caused by abrasion due to environmental contaminants, high pressures, speeds ...
Triple-Lok 37° flared fittings are for use with ...
Description:
Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for ...
Couplings manufactured to ISO standards and fitted with ...
Description:
Couplings manufactured to ISO standards and fitted with NBR (Nitrile) or VITON® seals, with secondary PTFE seals for backup purposes. Suitable for working environments within -25 to 100°C (+125°C for PVVM and VVS series), and -10 to +200°C for VITON-seal ...