Copper Pipe Fittings

Why use copper pipe fittings?

Copper is used as it can tolerate very high temperatures and as such, is used widely for central heating applications

Different types of Fittings

Adapters
Adapters are used to extend runs, or to simply change the connection type at the end of a pipe

Bushings
Bushings are used to join pipes of different sizes, usually by reducing a larger fitting down to a smaller pipe.

Couplings
A coupling is used to extend the run of a pipe, or change pipe sizes

Elbows
If you need to change the direction of flow, elbows are likely your best bet. Produced primarily in 90 and 45 degree angles (unique sizes like 22.5 and 60 are also available), elbows can be threaded or sweated, and are one of the most crucial fittings used in plumbing

Tees
When more than one branch is required of a water supply, tees are the way to go. Essentially a long coupling with an outlet on the side, these fittings feature their outlets at 90° from the inlet, and are sized according to their "run" (the horizontal, or straight-through dimension of the fitting), and the side outlet (the "top" of the fitting, 90 degrees off the run). When the run of a tee is smaller than the side outlet, it's often referred to as a "bull head" fitting.

Caps and Plugs
A cap, as its name suggests, is a cap that goes over the end of a pipe, creating a dead end. Plugs also stop up a pipe or tube system, but are plugged, like a stopper, into the end of the pipe.

Cross type Fitting
Cross type fittings contains 4 opening in 4 directions. These are connected when there are 4 pipes are meeting at a point.

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 9 รายการจาก 9 รายการ / Viewing 1 - 9 of 9 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Fitting Direction Fitting Type Push Fit Pipe Size Threaded Connection Gender Thread Size Thread Standard
RS Stock No. 712-6856
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.75592
THB143.845
Each: (In a Pack of 2)
Units
- End Stop 22mm - - - -
RS Stock No. 712-6799
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.75556
THB156.73
Each: (In a Pack of 2)
Units
- Equal Tee 15mm - - - -
RS Stock No. 712-6796
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.75502
THB135.66
Each: (In a Pack of 2)
Units
Straight Coupler 22mm - - - -
RS Stock No. 712-6837
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.75510
THB247.21
1 Pack of 2
Pack(s)
Straight Coupler 15mm 1/2 in G Female Female 1/2in G
RS Stock No. 712-6786
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.75531
THB111.611
Each: (In a Pack of 10)
Units
90° Elbow 15mm - - - -
RS Stock No. 712-6792
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.75532
THB161.145
Each: (In a Pack of 2)
Units
90° Elbow 22mm - - - -
RS Stock No. 712-6831
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.75591
THB111.985
Each: (In a Pack of 2)
Units
- End Stop 15mm - - - -
RS Stock No. 712-6780
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.75501
THB90.094
Each: (In a Pack of 5)
Units
Straight Coupler 15mm - - - -
RS Stock No. 712-6812
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.75537
THB126.225
Each: (In a Pack of 2)
Units
90° Street Elbow 15mm - - - -
Related Products
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.
The SharkBite Push-Fit Solution is a quick and ...
Description:
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints.
High quality Water Research Council (WRC) approved copper ...
Description:
High quality Water Research Council (WRC) approved copper solder ring capillary fittings.,Suitable for connecting copper tubes in accordance with BS2871 Part 1 and ISO 274. These potable solder ring fittings are manufactured in accordance with BS864 Part 2 and are ...
The Pegler Yorkshire 22mm 90° copper S12 elbow ...
Description:
The Pegler Yorkshire 22mm 90° copper S12 elbow is used with hard and half-hard copper tubes. It has a press-fit connection type. • Ambient temperature ranges between 15°C and 95°C• Clean, rapid and heat-free jointing. No complicated clamping techniques, long ...