Heat-Shrink & Cold-Shrink Sleeves

Heat ShrinkHeat shrink tubing is a type of extruded plastic tube that reduces in size when heated to a pre-determined shrink ratio to fit a specific application. A sleeve should be selected in a size larger than required to cover both the wire and components it is to be used with, before being shrunk to fit. Once fitted, the sleeve provides long lasting durability.Materials and TypesHeat shrink is available in various different materials, colours, sizes and shrink ratios to suit the application required. Some are available with an adhesive lining that helps to bond the tubing with the cables and components. Polyolefin is the most common material as it is highly durable and can withstand high temperatures without a restricted shelf life. They are also manufactured from PVC, fluoropolymer, neoprene and elastomeric materials. The material is often cross linked to assist with the tubing shrinking back to its original dimensions.The pre-determined shrink ratio, for example, 2:1 or 3:1, is the measurement of how small the sleeve goes in comparison to its expanded size. When the number is higher in the shrink ratio the greater the shrinkage. It allows a precise, secure fit that does not come off easily. Applications Heat shrink tubing is versatile and easy to use therefore it can be applied in an assortment of applications, the most common uses being: Electrical insulation – covering joints and repairs Strain relief – relieving pressure from the cable Wire bundling – in harness building and cable organisation Environmental and mechanical protection – preventing damage from abrasion, moisture, dust and chemicals Identification – the wide range of colours the tubing is manufactured in allows it to be used for colour coding and component ID InstallationWhen selecting the right size tubing, you should consider the maximum and minimum diameter of what you are covering. Use this information to check against the recovered diameter (the diameter after shrinking) and expanded diameter (the pre-shrinkage diameter) of the sleeve. You can cut most tubing to a suitable length using standard scissors. The unshrunk tubing can be slid over the area or objects it is to cover. Then with a hand held heat gun or heat shrink oven, the sleeve is shrunk tightly. To prevent uneven shrinkage or overheating, check the recommended heating temperature beforehand.

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 181 - 200 รายการจาก 1702 รายการ / Viewing 181 - 200 of 1702 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Sleeve Diameter Shrunk Diameter Colour Sleeve Type Adhesive Lined Shrink Ratio Sleeve Length Material Flame Retardant Halogen Free Series Standards Met
RS Stock No. 268-5007
Brand :RS PRO
THB230.78
1 Bag of 1
Bag(s)
6.4mm 3.2mm Green/Yellow Heat Shrink No 2:1 1.2m Polyolefin Yes Yes - BS3G 198 Part 3 Type 15, DEF 59-97 Issue3 Type 8, E1042-A6-March 2002, IEC 60684-3-216 Type C, RoHS Compliant
RS Stock No. 700-4510
Brand :RS PRO
THB549.36
1 Reel of 10 Metre(s)
Reel(s)
3mm 1mm Red Heat Shrink No 3:1 10m Polyolefin Yes No - UL
RS Stock No. 700-4753
Brand :RS PRO
THB624.89
1 Reel of 3 Metre(s)
Reel(s)
25.4mm 12.7mm Blue Heat Shrink No 2:1 3m Polyolefin Yes No - UL
RS Stock No. 700-4630
Brand :RS PRO
THB54.936
Each
Units
3.2mm 1.6mm Black Heat Shrink No 2:1 10m Polyolefin Yes No - UL
RS Stock No. 666-925
Brand :RS PRO
THB710.96
1 Box of 6 Metre(s)
Box(es)
19.1mm 9.5mm Black Heat Shrink No 2:1 6m Polyolefin Yes No - RoHS Compliant, UL
RS Stock No. 397-893
Brand :RS PRO
THB73.584
Each: (In a Pack of 5)
Units
3.2mm 1.6mm Blue Heat Shrink No 2:1 1.2m Polyolefin Yes No - -
RS Stock No. 481-1775
Brand :RS PRO
THB180.70
Each
Units
3mm 1mm Black Heat Shrink Yes 3:1 1.2m Polyolefin Yes No - AMS-DTL-23053/4 Class 3, RoHS Compliant, UL 224 E75077 CSA C22.2 No.198.1
RS Stock No. 700-4532
Brand :RS PRO
THB56.029
Each
Units
3mm 1mm Black Heat Shrink No 3:1 10m Polyolefin Yes No - UL
RS Stock No. 417-7261
Brand :RS PRO
THB700.43
1 Bag of 20 Metre(s)
Bag(s)
6.4mm 3.2mm Black Heat Shrink No 2:1 66 x 300mm Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 483-4194
Brand :RS PRO
THB344.924
Each: (In a Pack of 5)
Units
25.4mm 12.7mm Grey Heat Shrink No 2:1 1.2m Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 481-1797
Brand :RS PRO
THB218.51
Each
Units
6.4mm 2mm Black Heat Shrink Yes 3:1 1.2m Polyolefin Yes No - AMS-DTL-23053/4 Class 3, RoHS Compliant, UL 224 E75077 CSA C22.2 No.198.1
RS Stock No. 443-4980
Brand :RS PRO
THB2,948.52
1 Bag of 20
Bag(s)
38.1mm 19.1mm Clear Heat Shrink No 2:1 300mm Polyolefin No Yes - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 562-678
Brand :RS PRO
THB347.93
1 Bag of 1
Bag(s)
9mm 3mm Black Heat Shrink Yes 3:1 1.2m Polyolefin Yes Yes - ASTM, BS 6853, BSS 7239, LUL E 1042. A6, RoHS Compliant, SAE-AMS-DTL-23053
RS Stock No. 241-7337
Brand :RS PRO
THB177.17
Each
Units
3mm 1mm Red Heat Shrink Yes 3:1 1.2m Polyolefin Yes No - AMS-DTL-23053/4 Class 3, RoHS Compliant, UL 224 E75077 CSA C22.2 No.198.1
RS Stock No. 700-4472
Brand :RS PRO
THB537.91
1 Reel of 5 Metre(s)
Reel(s)
9mm 3mm Yellow Heat Shrink No 3:1 5m Polyolefin Yes No - UL
RS Stock No. 417-9598
Brand :RS PRO
THB3,055.80
1 Bag of 20
Bag(s)
12.7mm 6.4mm Black Heat Shrink No 2:1 300mm Polyolefin Yes Yes - BS3G 198 Part 3 Type 15, E1042-A6-March 2002, IEC 60684-3-216 Type C, RoHS Compliant
RS Stock No. 417-7299
Brand :RS PRO
THB1,099.63
1 Bag of 20
Bag(s)
19.1mm 9.5mm Black Heat Shrink No 2:1 300mm Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 399-928
Brand :RS PRO
THB75.266
Each: (In a Pack of 5)
Units
4.8mm 2.4mm Clear Heat Shrink No 2:1 1.2m Polyolefin No Yes - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 281-2883
Brand :RS PRO
THB7,055.03
1 Bag of 5
Bag(s)
40mm 13mm Black Heat Shrink No 3:1 1.2m Polyolefin Yes Yes - BS3G 198 Part 3 Type 15, E1042-A6-March 2002, IEC 60684-3-216 Type D, RoHS Compliant
RS Stock No. 398-307
Brand :RS PRO
THB73.798
Each: (In a Pack of 5)
Units
4.8mm 2.4mm Red Heat Shrink No 2:1 1.2m Polyolefin Yes No - -
Related Products
RaySpool system tubing offer a convenient dispensing system ...
Description:
RaySpool system tubing offer a convenient dispensing system for heat shrink tubing. The LSTT series of heat shrink tubing are highly flexible with a low shrink temperature allowing for faster recovery and usage near temperature sensitive materials. They are not ...
Heat shrink tube from dispenser boxPLG heat shrink ...
Description:
Heat shrink tube from dispenser boxPLG heat shrink tube in various colours and sizesIndispensible for insulation, repairs and labelling in both pastime and professional applicationsHSB box is stable, space-saving and handyPolyolefin cross linked by irradiation, thin-walledTemperature range -55° → +125 ...
Three-colour coded, watertight crimp splices covered with dual ...
Description:
Three-colour coded, watertight crimp splices covered with dual wall heat shrink tubing and hot melt inner liner. The crimp splices offer excellent strain relief, visual inspection, solvent and moisture resistance with good physical and electrical properties. Operating temperature -55°C to ...
Glenair full nelson heatshrink boot series 77 type ...
Description:
Glenair full nelson heatshrink boot series 77 type 1 offer excellent solvent, fuel and oil resistance and have superb extreme temperature resilience, rated for 3000 hours at +150 deg C. These heat shrink boots fit most standard boot adaptors for ...