DC Motors

DC motors are the most widely used type of motor with initial costs typically less than AC systems for low-power units. DC motors can be used for a wide range of applications from small tools and appliances, through to electric vehicles, lifts and hoists. DC Motors speed can be controlled by varying the supply voltage and are available in a wide range of voltages, however the most popular type are 12 V and 24 V, with some of the advantages being:

  • Easy installation
  • Speed control over a wide range
  • Quick Starting, Stopping, Reversing and Acceleration
  • High Starting Torque
  • Linear speed-torque curve

Types of DC Motors
There are two common types of DC motor, brushless and brushed. In both brushless and brushed motors, magnets drive the spinning (rotary) motion of the motor shaft.

  • Brushed Motors These are a more traditional type of motor and are typically used in cost-sensitive applications, where control systems are relatively simple, such as in consumer applications and more basic industrial equipment.
  • Brushless Motors Brushless motors alleviate some of the issues associated with brushed motors such as short life span for high use applications and are mechanically much simpler in design (not having brushes). The advantages of brushless motors are longer life, little maintenance and high efficiency (85-90%). These types of motors are generally used in speed and positional control with applications such as fans, pumps and compressors, where reliability and ruggedness are required.

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 21 - 40 รายการจาก 212 รายการ / Viewing 21 - 40 of 212 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Supply Voltage DC Motor Type Power Rating Output Speed Shaft Diameter Maximum Output Torque Length Width Depth Dimensions Current Rating Core Construction Series Standards Met
RS Stock No. 752-1951
Brand :RS PRO
THB1,008.08
Each
Units
4.5 15 V - 11 W 5216 rpm 6mm 206 gcm 86.6mm 37 (Dia.)mm - 37 (Dia.) x 86.6 mm 1.26 A Metal - -
RS Stock No. 892-8767
Brand :RS PRO
THB4,166.25
Each
Units
24 V dc Brushless - 5260 rpm 4mm 0.25 Nm 42.2mm 42.8mm - 42.8 (Dia.) x 42.2 mm 7 A Permanent Magnet - CE, RoHS
RS Stock No. 752-1949
Brand :RS PRO
THB882.84
Each
Units
4.5 15 V - 11 W 5216 rpm 6mm 206 gcm 84.1mm 37 (Dia.)mm - 37 (Dia.) x 84.1 mm 1.26 A Metal - -
RS Stock No. 834-7584
Brand :RS PRO
THB2,360.40
Each
Units
9 15 V dc - - - - - 62mm 41mm 25mm 62 x 41 x 25 mm 12 (Continuous) A - 919D -
RS Stock No. 752-1986
Brand :RS PRO
THB1,374.10
Each
Units
4.5 15 V - 21.2 W 6000 rpm 6mm 154.4 gcm 91mm 35.8 (Dia.)mm - 35.8 (Dia.) x 91 mm 2.85 A Metal - -
RS Stock No. 235-7904
Brand :RS PRO
THB8,461.21
Each
Units
24 V dc Brushed 183 W 4100 rpm 8mm 370 mNm 145mm - - 54 (Dia.) x 145 mm 6.6 A Iron Core - -
RS Stock No. 235-7831
Brand :RS PRO
THB5,963.72
Each
Units
24 V dc Brushed 20 W 5300 rpm - 8.1 Ncm 450mm 40mm - 40 (Dia.) x 450 mm - Iron Core - -
RS Stock No. 752-1992
Brand :RS PRO
THB927.43
Each
Units
4.5 15 V - 7 W 7300 rpm 6mm 114 gcm 73.6mm 37 (Dia.)mm - 37 (Dia.) x 76.1 mm 840 mA Metal - -
RS Stock No. 225-9541
Brand :RS PRO
THB4,748.89
Each
Units
14.5 V dc Brushed 41 W 3000 rpm 6mm 13 Ncm 37.7mm - - 120 (Dia.) x 37.7 mm 6.9 A - - RoHS
RS Stock No. 892-8751
Brand :RS PRO
THB5,033.24
Each
Units
24 V dc Brushless - 3500 rpm 6.2mm 0.05 Nm 80.7mm 22mm - 22 (Dia.) x 80.7 mm 1.5 A - - CE, RoHS
RS Stock No. 536-6046
Brand :RS PRO
THB3,849.28
Each
Units
36 V dc Brushless - 4000 rpm 8mm 0.68 Nm 74mm 47mm 48mm 57 (Dia.) x 74 mm 9.8 A Metal 726 -
RS Stock No. 752-1995
Brand :RS PRO
THB1,055.19
Each
Units
4.5 15 V - 7 W 7300 rpm 6mm 114 gcm 78.8mm 37 (Dia.)mm - 37 (Dia.) x 78.8 mm 840 mA Metal - -
RS Stock No. 752-1967
Brand :RS PRO
THB1,281.36
Each
Units
6 15 V - 7.98 W 41 rpm 6mm 78.4 gcm 80.5mm 32 (Dia.)mm - 32 (Dia.) x 80.5 mm 990 mA Metal - -
RS Stock No. 892-8760
Brand :RS PRO
THB4,214.52
Each
Units
24 V dc Brushless - 4500 rpm 4mm 0.066 Nm 54mm 33mm - 33 (Dia.) x 54 mm 1.45 A - - CE, RoHS
RS Stock No. 321-3186
Brand :RS PRO
THB1,055.67
Each
Units
12 V dc - 36.88 W 4289 rpm 6.35mm 82.08 gcm 69mm - - 51.8 (Dia.) x 69 mm 5.28 A Iron Core - -
RS Stock No. 752-1983
Brand :RS PRO
THB927.43
Each
Units
4.5 15 V - 7 W 7300 rpm 6mm 114 gcm 76.1mm 37 (Dia.)mm - 37 (Dia.) x 76.1 mm 840 mA Metal - -
RS Stock No. 752-1958
Brand :RS PRO
THB1,000.04
Each
Units
4.5 15 V - 11 W 5216 rpm 6mm 206 gcm 86.6mm 37 (Dia.)mm - 37 (Dia.) x 86.6 mm 1.26 A Metal - -
RS Stock No. 752-1955
Brand :RS PRO
THB1,142.08
Each
Units
4.5 15 V - 11 W 5216 rpm 6mm 206 gcm 89.1mm 37 (Dia.)mm - 37 (Dia.) x 89.1 mm 1.26 A Metal - -
RS Stock No. 892-8779
Brand :RS PRO
THB3,199.26
Each
Units
36 V dc Brushless - 4000 rpm 8mm 0.35 Nm 96mm 57mm - 57 (Dia.) x 96 mm 5.5 A - - CE, RoHS
RS Stock No. 892-8776
Brand :RS PRO
THB4,527.84
Each
Units
24 V dc Brushless - 4840 rpm 4mm 0.36 Nm 47.6mm 42.8mm - 42.8 (Dia.) x 47.6 mm 10 A Permanent Magnet - CE, RoHS
Related Products
Brushless DC motors of flat design with a ...
Description:
Brushless DC motors of flat design with a low profile bodySpeed constant: 374rpm/VAvailable in 2 versions: Standard, stock no. 420-4997, or with Hall effect sensors, stock nos. 420-5192 and 495-063Standard version is suitable for conventional voltage dependent applicationsHall effect versions ...
Professional range of TNi21 series DC Brushless motors ...
Description:
Professional range of TNi21 series DC Brushless motors from Crouzet. These electronic control units are designed for speed control and torque control with absolute precision, making them ideal for applications in industry. The DC motors connect via a connector or ...
Brushless motor 803700 SMi22 CANopen 600W Speeds=3200RPM Vdc=48 ...
Description:
Brushless motor 803700 SMi22 CANopen 600W Speeds=3200RPM Vdc=48 Ballast=Without (Magnetic.Encoder=4096PPR Frame.Size=Square_75mm Nom.Speed=3130RPM Nom.Torque=1.9Nm Nom.Current=15.1A Key.Shaft=With). DC Brushless motor for position, speed and torque control applicationsHigh precision thanks to the 4096 position per ...
Suitable for motion, movement or positioning applications, where ...
Description:
Suitable for motion, movement or positioning applications, where the user can select the drive or gearbox unit to be fitted. 63 mm diameter DC motor for high-powered drive applications.2 ball bearingsPower supplied via 2 wires.