Epoxy Resins & Epoxy Adhesives

Epoxy resins and adhesives are characterised by their excellent electrical properties and chemical resistance, strength and low absorption of moisture. They make great adhesives and also one of the few types of glue that can be used on metals and glass. Epoxy can be used as a protective coating as well as materials in circuit boards and for patching holes in concrete pavements. These versatile resins offer high strength resistance to corrosion. The high strength to weight ratio and dimensional stability as well as adhesion properties make them ideal for a wide range of applications. Different resins are produced by varying the ratios of the chemical components.



Resins are relatively high in viscosity (measure of its resistance to flow), so that they are moulded at temperatures around 50 to 100°C, or dissolved in an inert solvent (solvent that does not react with anything in solution) to reduce viscosity to a point at which lamination at room temperature becomes possible.



How are they made?


Most epoxy resins are an industrial product derived from petroleum and are themselves the result of a chemical reaction called curing. This involves epoxies and other chemicals more commonly known as hardeners or curing agents. Depending on the type of reaction used to produce them, they can be either low-molecular honey-like liquids or high-molecular, solid substances. Their molecular weight often determines their potential uses and applications.



Did you know?


Currently. there are more than 50 different substances known as epoxy resins. Also, there are hundreds of hardeners to modify epoxy polymer properties to meet the most varied requirements.



Epoxy uses


  • General purpose adhesives

  • As the binder in cement and mortars

  • Rigid foams

  • Non-skid coatings

  • Solidifying sandy surfaces in oil drilling

  • Industrial coatings

  • Potting and encapsulating media

  • Fibre reinforced plastics


Advantages of Epoxy


  • Low shrink during cure

  • Excellent moisture and chemical resistance

  • Good electrical properties

  • Increased mechanical and fatigue strength

  • Impact resistant

  • No VOCs (Volatile Organic Compounds)

  • Long shelf life

  • ...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 20 รายการจาก 27 รายการ / Viewing 1 - 20 of 27 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Material Compatibility Colour Package Type Package Size Setting Time Minimum Operating Temperature Maximum Operating Temperature Trade Name Cure Time Flame Retardant Shear Strength Filler Material Chemical Composition Odour
RS Stock No. 850-956
Brand :RS PRO
THB1,018.02
1 Kit
Kit(s)
Glass, Metal, Plastic, Wood Yellow Tube 150 g - - - - 24 h Yes - - Bisphenol A-(Epichlorhydrin), Bisphenol F Slight
RS Stock No. 850-934
Brand :RS PRO
THB390.64
Each
Units
Aluminium, Steel Yellow Cartridge 40 ml 3 → 4min - - - 2 h Yes - - Bisphenol A-(Epichlorhydrin), Bisphenol F Slight
RS Stock No. 850-962
Brand :RS PRO
THB249.06
Each
Units
Metal Black Syringe 25 ml 5min - - - 24 h Yes - Inorganic Barium Sulphate, Bisphenol A-(Epichlorhydrin), Limestone, Magnesium Carbonate, Talc -
RS Stock No. 553-614
Brand :RS PRO
THB1,523.96
1 Box of 50
Box(es)
Ceramic, Concrete, Metal, Plastic, Wood Transparent Sachet 150 g 3 → 5min -55°C +100°C - 24 h Yes - - 2, 4, 6-Tris(Dimethylaminomethyl)Phenol Characteristic
RS Stock No. 850-940
Brand :RS PRO
THB254.74
1 Kit
Kit(s)
Glass, Metal, Plastic, Wood Clear Tube 16 g - - - - 24 h Yes - - Bisphenol A-(Epichlorhydrin), Bisphenol F Slight
RS Stock No. 567-581
Brand :RS PRO
THB610.34
Each
Units
- Red Syringe 10 ml - - +140°C - 20 (120°C) min, 40 (100°C) min, 60 (90°C) min - - - Aliphatic Amines, Epoxy Resin, Neopentyl Glycol Diglycidyl Ether -
RS Stock No. 691-173
Brand :RS PRO
THB2,151.83
Each
Units
Metal, Steel Grey Tub 500 g - - +93°C - 16 h - 14 N/mm² Steel - -
RS Stock No. 561-182
Brand :RS PRO
THB286.94
1 Bag of 4
Bag(s)
Ceramic, Concrete, Glass Fibre Reinforced Polymer, Masonry, Plaster, Plastic, Wood Blue, White Strip 4 Strips 5min -20°C +120°C - 24 h - - - - Ammoniacal, Sulphurous
RS Stock No. 132-605
Brand :RS PRO
THB238.27
Each
Units
Ceramic, Glass, Metal, Plastic, Stone, Wood Transparent Dual Cartridge 24 ml - - - - - No - - Epoxy Resin Mercaptan
RS Stock No. 850-978
Brand :RS PRO
THB1,530.93
1 Kit
Kit(s)
Metal White Tub 500 g - - - - 24 h Yes - Aluminium 2, 3, 2'-Iminodiethylamine, 4-Tert-Butylphenol, 6-Diazaoctanethylenediamine, Aluminium Powder (Pyrophoric), Barium Sulphate, Silica Quartz Sweet
RS Stock No. 918-1401
Brand :RS PRO
THB432.31
Each
Units
Metal, Plastic Yellow Cartridge 25 ml - - - - 20 min @ +100°C, 60 min @ +75°C - - - Epoxy Resin Slight
RS Stock No. 264-1350
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.320123
Brand :Evo-Stik
THB616.02
Each
Units
Metal Grey Stick 57 g 10min - - Hard & Fast - - - Steel - -
RS Stock No. 189-3155
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.DP-810 400ML
Brand :3M
THB4,468.00
Each
Units
Composite, Metal, Plastic Tan Cartridge 400 ml - - - Scotch-Weld™ 24 h @ 22 °C - 25 MPa @ 24 °C - - -
RS Stock No. 867-2802
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.ARA-400006
Brand :Araldite
THB2,381.23
Each
Units
Cardboard, Ceramic, Chipboard, Dry Concrete, Fabric, Glass, Leather, Masonry, Metal, Plastic, Rubber, Wood Orange, White Tube 100 ml 3h -30°C +65°C Epoxy Rapid 20 min - - - Epoxy Resin -
RS Stock No. 138-5685
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.Araldite 2014 200ml
Brand :Araldite
THB49,646.30
Each
Units
- Grey Cartridge 200 ml 60min - +76°C Araldite 2014 180 min - 2700 psi - - -
RS Stock No. 867-2795
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.ARA-400002
Brand :Araldite
THB2,073.02
Each
Units
Cardboard, Ceramic, Chipboard, Dry Concrete, Fabric, Glass, Leather, Masonry, Metal, Plastic, Rubber, Wood Orange, White Tube 100 ml 14h -30°C +65°C - 8 h - - - Epoxy Resin -
RS Stock No. 138-5682
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.Araldite 2014 50ml
Brand :Araldite
THB17,482.30
Each
Units
- Grey Cartridge 50 ml 60min - +76°C Araldite 2014 180 min - 2700 psi - - -
RS Stock No. 388-8954
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.140295100
Brand :Araldite
THB929.29
Each
Units
Ferrous Metal, Non Ferrous Metal, Rubber, Wood Yellow Dual Cartridge 50 ml - +40°C +80°C Araldite 2012 120 min Yes 19 N/mm² - - -
RS Stock No. 152-6878
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.ERHTCX_ZF10S
Brand :Electrolube
THB659.82
Each
Units
- White Syringe 10 ml - -50°C +180°C - - - - - Epoxy Resin -
RS Stock No. 184-9494
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.25000248
Brand :Araldite
THB1,274.00
Each
Units
- Grey - 50 ml - +10°C +100°C Araldite 2013-1 30 h - >17 MPa - - -
Related Products
Acrylic based clear hot melt adhesiveExceptional adhesion to ...
Description:
Acrylic based clear hot melt adhesiveExceptional adhesion to many difficult to bond materialsBonds to Metals, Concrete, Ceramics, Wood, Leather, Fabrics, Rubber and MelamineBonds achieved on plastics such as PVC, Polycarbonate, ABS, Polyester, Polystyrene and Acrylics.
Introducing the EPX manual applicator from 3M™ Scotch-Weld™ ...
Description:
Introducing the EPX manual applicator from 3M™ Scotch-Weld™ dispenses two-component structural adhesives packaged in Duo-Pak cartridges. It makes dispensing the adhesive clean easily and with minimal wastage. A hand operated trigger drives the two pistons directly into the Dual-Pak cartridge, ...
A two component paste mixed in a 1:1 ...
Description:
A two component paste mixed in a 1:1 ratio that quickly crosslinks to create a mouldable insulating rubber. Suitable for use in place of tapes, heatshrink products and resins. Re-enterableNon toxicFlameproofMouldableFlexible & elasticHigh Dielectric strength: >20 kV/mm.
Single component, liquid adhesives that cure hard in ...
Description:
Single component, liquid adhesives that cure hard in the absence of air or oxygen. Impervious to most industrial fluidsHelps to prevent ’fretting’ corrosionOperating temperature range: -55°C to +150°CSpecifically designed for retaining and sealing slip-fitted cylindrical assembliesCan be used to ...